AM26LV32 Datasheet | Texas Instruments

Features - Switching rates up to 32 MHz - Operates from single 3.3-V supply - Ultra-low power dissipation: 27 m W typical - Open-circuit, short-circuit, and terminated fail-safe - - 0.3-V to 5.5-V mon-mode range with ±200-m V sensitivity - Accepts 5-V logic inputs with 3.3-V VCC - Input hysteresis: 50 m V typical - 235 m W With four receivers at 32 MHz - Pin-to-pin patible with AM26C32 and AM26LS32 2 Applications - High-reliability automotive applications - Factory automation - ATM and cash counters - Smart grid - AC and servo motor drives G4 12 1A 2 1B 1 3 Description The AM26LV32 device is a Bi CMOS, quadruple differential line receiver with 3-state outputs, which is designed to be similar to the TIA/EIA-422-B and ITU Remendation V.11 receivers with reduced mon-mode voltage range due to reduced supply voltage. The device is optimized for balanced bus transmission at switching rates up to 32 MHz. The enable function is mon to all four receivers and offers a choice of active-high or active-low inputs. The 3-state outputs permit connection directly to a bus-organized system. Each device features high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 m V over a mon-mode input voltage range from - 0.3 V to 5.5 V. When the inputs are open-circuit, the outputs are in the high logic state. The AM26LV32C is characterized for operation from 0°C to 70°C. The AM26LV32I is characterized for operation from - 40°C to 85°C. Package Information PART NUMBER PACKAGE(1) PACKAGE SIZE(2) SOIC (16) SO (16) 9.9 mm × 6 mm 10.2 mm × 7.8 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. (2) The package size (length × width) is a nominal value and includes pins, where applicable. 3 1Y 2A 6 2B 7 5 2Y 3A 10 3B 9 11...