BQ25713B Datasheet | Texas Instruments

Features - Pin-to-pin and software patible to BQ25703A - Charge 1s to 4s battery from wide range of input source - 3.5-V to 24-V Input operating voltage - Supports USB2.0, USB 3.0, USB 3.1 (Type C), and USB Power Delivery (USB-PD) input current settings - Seamless transition among buck, buck-boost and boost operations - Input current and voltage regulation (IDPM and VDPM) against source overload - Power/current monitor for CPU throttling - prehensive PROCHOT profile, IMVP8/ IMVP9 pliant - Input and battery current monitor - System power monitor, IMVP8/IMVP9 pliant - Narrow voltage DC (NVDC) power path management - Instant-on with no battery or depleted battery - Battery supplements system when adapter is fully-loaded - Battery MOSFET ideal diode operation in supplement mode - Power up USB port from battery (USB OTG) - 3-V to 20.8-V VOTG With 8-m V resolution - Output current limit up to 6.4 A with 50-m A resolution - TI patented Pass Through Mode (PTM) for system power efficiency improvement and battery fast charging - When system is powered by battery only, Vmin Active Protection (VAP) mode supplements battery from input capacitors during system peak power spike - Input Current Optimizer (ICO) to extract max input power - 800-k Hz or 1.2-MHz Programmable switching frequency for 2.2-µH or 1.0-µH inductor - Host control interface for flexible system configuration - I2C Port optimal system performance and status reporting - Hardware pin to set input current limit without EC control - Integrated ADC to monitor voltage, current and power - High accuracy for the regulation and monitor - ±0.5% Charge voltage regulation - ±2% Input/charge current regulation - ±2% Input/charge current monitor - ±4% Power monitor - Safety - Thermal shutdown - Input, system, battery overvoltage protection - Input, MOSFET, inductor overcurrent protection - Safety-Related Certifications: - IEC 62368-1 CB Certification - Low battery quiescent...