CC2531F128 Datasheet | Texas Instruments

FEATURES - 2345 RF/Layout - 2.4-GHz IEEE 802.15.4 pliant RF Transceiver - Excellent Receiver Sensitivity and Robustness to Interference - Programmable Output Power Up to 4.5 d Bm - Few External ponents - Only a Single Crystal Needed for Asynchronous Networks - 6-mm × 6-mm QFN40 Package - Suitable for Systems Targeting pliance With Worldwide Radio-Frequency Regulations: ETSI EN 300 328 and EN 300 440 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T-66 (Japan) - USB - USB 2.0 Certified Full Speed Device (12 Mbps) - 5 Highly Flexible Endpoints - 1-KB Dedicated FIFO - DMA Access to FIFO - No 48-MHz Crystal Required - Low Power - Active Mode RX (CPU Idle): 24 m A - Active Mode TX at 1 d Bm (CPU Idle): 29 m A - Power Mode 1 (4 ms Wake-Up): 0.2 m A - Power Mode 2 (Sleep Timer Running): 1 m A - Power Mode 3 (External Interrupts): 0.4 m A - Wide Supply-Voltage Range (2 V- 3.6 V) - Microcontroller - High-Performance and Low-Power 8051 Microcontroller Core With Code Prefetch - 256-KB or 128-KB In-System-Programmable Flash - 8-KB RAM With Retention in All Power Modes - Hardware Debug Support - Peripherals - Powerful Five-Channel DMA - IEEE 802.15.4 MAC Timer, General-Purpose Timers (One 16-Bit, Two 8-Bit) - IR Generation Circuitry - 32-k Hz Sleep Timer With Capture - CSMA/CA Hardware Support - Accurate Digital RSSI/LQI Support - Battery Monitor and Temperature Sensor - 12-Bit ADC With Eight Channels and Configurable Resolution - AES Security...