Datasheet4U Logo Datasheet4U.com

CD54HCT574F3A Datasheet Octal D-type Flip-flop

Manufacturer: Texas Instruments

Overview: CD54HC374, CD74HC374, CD54HCT374, CD74HCT374, CD54HC574, CD74HC574, CD54HCT574, CD74HCT574 SCHS183E – NOVEMBER 1998 – REVISED OCTOBER 2022 CDx4HC374 High-Speed CMOS Logic Octal D-Type Flip-Flop, 3-State Positive-Edge.

This datasheet includes multiple variants, all published together in a single manufacturer document.

General Description

The ’HC374, ’HCT374, ’HC574, and ’HCT574 are octal D-type flip-flops with 3-state outputs and the capability to drive 15 LSTTL loads.

The eight edgetriggered flip-flops enter data into their registers on the LOW to HIGH transition of clock (CP).

The output enable (OE) controls the 3-state outputs and is independent of the register operation.

Key Features

  • Buffered inputs.
  • Common three-state output enable control.
  • Three-state outputs.
  • Bus line driving capability.
  • Typical propagation delay (clock to Q) = 15 ns at VCC = 5 V, CL = 15 pF, TA = 25℃.
  • Fanout (over temperature range).
  • Standard outputs: 10 LSTTL loads.
  • Bus driver outputs: 15 LSTTL loads.
  • Wide operating temperature range:.
  • 55℃ to 125℃.
  • Balanced propagation delay and transition times.

CD54HCT574F3A Distributor

More Datasheets from Texas Instruments

Part Number Description
CD54HCT574 Octal D-Type Flip-Flop
CD54HCT573 OCTAL TRANSPARENT D-TYPE LATCHES
CD54HCT573F3A OCTAL TRANSPARENT D-TYPE LATCHES
CD54HCT533 Octal Inverting Transparent Latch
CD54HCT534 Octal D-Type Flip-Flop
CD54HCT540 Octal Buffer and Line Drivers
CD54HCT541 Octal Buffer and Line Drivers
CD54HCT563 Octal Inverting Transparent Latch
CD54HCT564 Octal D-Type Flip-Flop
CD54HCT00 Quadruple 2-Input NAND Gates