CDCEL913-Q1
Overview
The CDCE913-Q1 and CDCEL913-Q1 devices are modular, phase-locked loop (PLL) based programmable clock synthesizers. These devices provide fl.
- 1 Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results: - Device Temperature Grades - Grade 1 For CDCE913-Q1: -40°C to +125°C Ambient Operating Temperature - Grade 3 For CDCEL913-Q1: -40°C to +85°C Ambient Operating Temperature - Device HBM ESD Classification Level H2 - Device CDM ESD Classification Level C6
- In-System Programmability and EEPROM - Serial Programmable Volatile Register - Nonvolatile EEPROM to Store Customer Settings
- Flexible Input Clocking Concept - External Crystal: 8 MHz to 32 MHz - On-Chip VCXO: Pull Range ±150 ppm - Single-Ended LVCMOS up to 160 MHz
- Free Selectable Output Frequency up to 230 MHz
- Low-Noise PLL Core - PLL Loop Filter Components Integrated - Low Period Jitter (Typical 50 ps)
- Separate Output Supply Pins - CDCE913-Q1: 3.3 V and 2.5 V - CDCEL913-Q1: 1.8 V
- Flexible Clock Driver - Three User-Definable Control Inputs [S0, S1, S2], for Example, SSC Selection, Frequency Switching, Output Enable, or Power Down - Generates Highly Accurate Clocks for Video, Audio, USB, IEEE1394, RFID, Bluetooth®, WLAN, Ethernet, and GPS - Generates Common Clock Frequencies Used With TI-DaVinci™, OMAP™, DSPs - Programmable SSC Modulation - Enables 0-PPM Clock Generation
- 1.8-V Device Power Supply
- Packaged in TSSOP
