Datasheet4U Logo Datasheet4U.com

DAC3283 - Digital-to-Analog Converter

Description

The DAC3283 is a dual-channel 16-bit 800 MSPS digital-to-analog converter (DAC) with an 8-bit LVDS input data bus with on-chip termination, optional 2x4x interpolation filters, digital IQ compensation and internal voltage reference.

Features

  • 1 Dual, 16-Bit, 800 MSPS DACs.
  • 8-Bit Input LVDS Data Bus.
  • Byte-Wide Interleaved Data Load.
  • 8 Sample Input FIFO.
  • Optional Data Pattern Checker.
  • Multi-DAC Synchronization.
  • Selectable 2x-4x Interpolation Filters.
  • Stop-Band Attenuation > 85 dB.
  • Fs/2 and ± Fs/4 Coarse Mixer.
  • Digital Quadrature Modulator Correction.
  • Gain, Phase and Offset Correction.
  • Temperature Sensor.
  • 3- or 4-Wire Ser.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community DAC3283 SLAS693C – MARCH 2010 – REVISED MARCH 2015 DAC3283 Dual-Channel, 16-Bit, 800 MSPS, Digital-to-Analog Converter (DAC) 1 Features •1 Dual, 16-Bit, 800 MSPS DACs • 8-Bit Input LVDS Data Bus – Byte-Wide Interleaved Data Load – 8 Sample Input FIFO – Optional Data Pattern Checker • Multi-DAC Synchronization • Selectable 2x-4x Interpolation Filters – Stop-Band Attenuation > 85 dB • Fs/2 and ± Fs/4 Coarse Mixer • Digital Quadrature Modulator Correction – Gain, Phase and Offset Correction • Temperature Sensor • 3- or 4-Wire Serial Control Interface • On-Chip 1.2-V Reference • Differential Scalable Output: 2 to 20 mA • Single-Carrier TM1 WCDMA ACLR: 82 dBc at fOUT = 122.88 MHz • Low Power: 1.
Published: |