Datasheet4U Logo Datasheet4U.com

DLPC350 - Digital Controller

Description

The DLPC350 digital controller is required for reliable operation of the DLP4500 or DLP4500NIR digital micromirror device (DMD).

Features

  • 1 Required for reliable operation of the DLP4500 and DLP4500NIR DMDs.
  • High-speed pattern display mode.
  • 1-Bit binary pattern rates to 4225 Hz.
  • 8-Bit grayscale pattern rates to 120 Hz.
  • 1-to-1 input mapping to micromirrors.
  • Multiple bit depths and LEDs in pattern sequences.
  • Easy synchronization with cameras and sensors.
  • Two configurable input triggers.
  • Two configurable output triggers.
  • 14 fully programmable GP.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DLP-IO8-G USB-BASED 8-CHANNEL DATA ACQUISITION MODULE DLP Design
DLP05LC LOW CAPACITANCE UNIDIRECTIONAL TVS Diodes Incorporated
DLP0NSA150HL2 Chip Common Mode Choke Coil Murata
DLP0NSC280HL2 Chip Common Mode Choke Coil Murata
DLP0NSN121HL2 Chip Common Mode Choke Coil Murata

Other Datasheets by Texas Instruments

Part Number Description
DLPC300 Digital Controller
DLPC3421 Display Controller
DLPC3430 Display Controller
DLPC3432 Display Controller
DLPC3433 Display Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community DLPC350 DLPS029F – APRIL 2013 – REVISED MAY 2019 DLPC350 DLP® Digital Controller for DLP4500 and DLP4500NIR DMDs 1 Features •1 Required for reliable operation of the DLP4500 and DLP4500NIR DMDs • High-speed pattern display mode – 1-Bit binary pattern rates to 4225 Hz – 8-Bit grayscale pattern rates to 120 Hz – 1-to-1 input mapping to micromirrors – Multiple bit depths and LEDs in pattern sequences • Easy synchronization with cameras and sensors – Two configurable input triggers – Two configurable output triggers • 14 fully programmable GPIO signals • 64 Mb internal RAM – Stores up to 48 1-bit patterns – No external volatile memory required • Supports up to 32 MB external parallel flash for increased pat
Published: |