DRV600 - STEREO LINE DRIVER

Product Overview

Texas Instruments

Datasheet Details

Part number	DRV600
Manufacturer	Texas Instruments
File Size	1.43 MB
Description	STEREO LINE DRIVER
Datasheet	DRV600 Datasheet
Additional preview pages of the DRV600 datasheet.

Product details

Description

The DRV600 is a stereo line driver designed to allow the removal of the output dc-blocking capacitors for reduced component count and cost. 1.5 V/V and line outputs that has ±8-kV IEC ESD protection.

Features

Space Saving Package.
20-Pin, 4 mm × 4 mm Thin QFN, Thermally Optimized PowerPAD™ Package.
Ground-Referenced Outputs Eliminate DC-Blocking Capacitor.
Reduce Board Area.
Reduce Component Cost.
Improve THD+N Performance.
No Degradation of Low-Frequency Response Due to Output Capacitors.
Wide Power Supply Range: 1.8 V to 4.5 V.
2 Vrms/Ch Output Voltage into 600 Ω at 3.3 V.
Independent Right and Left Channel S.

📁 Similar Datasheet

DRV101 - PWM SOLENOID/VALVE DRIVER (Burr-Brown Corporation)
DRV102 - PWM SOLENOID/VALVE DRIVER (Burr-Brown Corporation)
DRV103 - PWM LOW-SIDE DRIVER (Burr-Brown Corporation)
DRV104 - 1.2A PWM High-Side Driver (Burr-Brown Corporation)
DRV1100 - HIGH POWER DIFFERENTIAL DRIVER AMPLIFIER (Burr-Brown Corporation)
DRV1101 - HIGH POWER DIFFERENTIAL LINE DRIVER (Burr-Brown Corporation)
DRV134 - (DRV134 / DRV135) AUDIO BALANCED LINE DRIVERS (Burr-Brown Corporation)
DRV135 - (DRV134 / DRV135) AUDIO BALANCED LINE DRIVERS (Burr-Brown Corporation)

Other Datasheets by Texas Instruments

DRV601 - STEREO LINE DRIVER
DRV602 - Pop-Free 3Vrms Line Driver
DRV603 - 3-VRMS Line Driver
DRV604 - 2Vrms Line Driver and HP Amp
DRV612 - 2-Vrms Line Driver
DRV632 - 2-VRMS Audio Line Driver

Published: May 26, 2023 |