Datasheet4U Logo Datasheet4U.com

DS78LS120 - Dual Differential Line Receiver

Description

The DS78LS120QML is a high performance, dual differential, TTL compatible line receiver for both balanced and unbalanced digital data transmission.

The inputs are compatible with EIA, Federal and MIL standards.

Features

  • 1.
  • 2 Meets EIA Standards RS232-C, RS422 and RS423, Federal Standards 1020, 1030 and MIL188-114.
  • Input Voltage Range of ±15V (Differential or Common-mode).
  • Separate Strobe Input for Each Receiver.
  • 5k Typical Input Impedance.
  • Optional 180Ω Termination Resistor.
  • 50mV Input Hysteresis.
  • 200mV Input Threshold.
  • Separate Fail-safe Mode.

📥 Download Datasheet

📁 Similar Datasheet

  • DS78LS120 - Dual Differential Line Receiver (Noise Filtering and Fail-Safe) (National Semiconductor)
  • DS78L12 - Hex TTL-MOS Inverter/Interface Gate (National Semiconductor)
  • DS7800 - Dual Voltage Level Translator (National Semiconductor)
  • DS7810 - (DS7810 - DS7812) Quad 2-Input TTL MOS Interface Gate (National Semiconductor)
  • DS7811 - (DS7810 - DS7812) Quad 2-Input TTL MOS Interface Gate (National Semiconductor)
  • DS7812 - (DS7810 - DS7812) Hex TTL MOS Inverter (National Semiconductor)
  • DS7820 - Dual Line Receiver (National Semiconductor)
  • DS7820A - Dual Line Receiver (National Semiconductor)
  • DS7830 - Dual Differential Line Driver (National Semiconductor)
  • DS7831 - Dual TRI-STATE Line Driver (National Semiconductor)
Other Datasheets by Texas Instruments
  • DS78LS120QML - Dual Differential Line Receiver
  • DS75176B - DS75176B/DS75176BT Multipoint RS-485/RS-422 Transceivers (Rev. C)
  • DS75176BT - DS75176B/DS75176BT Multipoint RS-485/RS-422 Transceivers (Rev. C)

Full PDF Text Transcription

Click to expand full text
DS78LS120 is OBSOLETE DS78LS120QML, DS78LS120 www.ti.com SNLS370C – SEPTEMBER 1999 – REVISED APRIL 2013 DS78LS120/DS78LS120QML Dual Differential Line Receiver (Noise Filtering and Fail-Safe) Check for Samples: DS78LS120QML, DS78LS120 FEATURES 1 •2 Meets EIA Standards RS232-C, RS422 and RS423, Federal Standards 1020, 1030 and MIL188-114 • Input Voltage Range of ±15V (Differential or Common-mode) • Separate Strobe Input for Each Receiver • 5k Typical Input Impedance • Optional 180Ω Termination Resistor • 50mV Input Hysteresis • 200mV Input Threshold • Separate Fail-safe Mode DESCRIPTION The DS78LS120QML is a high performance, dual differential, TTL compatible line receiver for both balanced and unbalanced digital data transmission.
Published: |