Datasheet4U Logo Datasheet4U.com

DS90UB934-Q1 Datasheet 100-MHz FPD-Link3 Deserializer

Manufacturer: Texas Instruments

General Description

• Qualified for automotive applications • AEC-Q100 qualified for automotive applications with the following results: – Device temperature grade 2: –40°C to +105°C ambient operating temperature – Device HBM ESD classification level ±2 kV – Device CDM ESD classification level C4 • Operates up to 100 MHz in 12-bit mode to support 1 MP/60 fps and 2 MP/30 fps imagers as well as satellite RADAR • Configurable 12-bit parallel CMOS compatible with DS90UB913A/933 serializers • Adaptive equalization compensates for cable aging and degradation effects • Ultra-low latency bi-directional control data channel with data protection • Cable link detect diagnostics • Supports Power-over-Coax operation (PoC) • ISO 10605 and IEC 61000-4-2 ESD compliant • Low radiated and conductive emissions • BIST (Built-In Self-Test) The DS90UB934-Q1 FPD-Link III deserializer, in conjunction with the DS90UB913A/933-Q1 serializers, supports the video transport needs with an ultrahigh-speed forward channel and an embedded bidirectional control channel.

The DS90UB934-Q1 converts the FPD-Link III stream into a parallel CMOS output interface designed to support automotive image sensors up to 12 bits at 100 MHz with resolutions including 1MP/60fps and 2MP/30fps.

The DS90UB933/934 chipset is fully AEC-Q100 qualified and designed to receive data across either 50-Ω single-ended coaxial or 100-Ω shielded-twisted pair (STP) cable assemblies.

Overview

DS90UB934-Q1 SNLS507C – SEPTEMBER 2016 – REVISED DECEMBER 2022 DS90UB934-Q1 12-Bit, 100-MHz FPD-Link III Deserializer for 1MP/60fps and 2MP/30fps.

Key Features

  • 2.