Datasheet4U Logo Datasheet4U.com

HC595 - 8-Bit Shift Registers

General Description

The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register.

The storage register has parallel 3state outputs.

Separate clocks are provided for both the shift and storage register.

Key Features

  • 1 8-Bit Serial-In, Parallel-Out Shift.
  • Wide Operating Voltage Range of 2 V to 6 V.
  • High-Current 3-State Outputs Can Drive Up to 15 LSTTL Loads.
  • Low Power Consumption: 80-μA (Maximum) ICC.
  • tpd = 13 ns (Typical).
  • ±6-mA Output Drive at 5 V.
  • Low Input Current: 1 μA (Maximum).
  • Shift Register Has Direct Clear.
  • On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products,.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HC595 8-bit shift register STMicroelectronics
HC595Y 8-bit shift register STMicroelectronics
HC524R HCMOS/TTL Connor Winfield
HC5500M03 Hybrid Coupler Yantel
HC5503 Low Cost 24V SLIC Intersil Corporation

Other Datasheets by Texas Instruments

Part Number Description
HC595M 8-BIT SHIFT REGISTERS
HC541 OCTAL BUFFERS AND LINE DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community SN54HC595, SN74HC595 SCLS041I – DECEMBER 1982 – REVISED SEPTEMBER 2015 SNx4HC595 8-Bit Shift Registers With 3-State Output Registers 1 Features •1 8-Bit Serial-In, Parallel-Out Shift • Wide Operating Voltage Range of 2 V to 6 V • High-Current 3-State Outputs Can Drive Up to 15 LSTTL Loads • Low Power Consumption: 80-μA (Maximum) ICC • tpd = 13 ns (Typical) • ±6-mA Output Drive at 5 V • Low Input Current: 1 μA (Maximum) • Shift Register Has Direct Clear • On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.