ISO3086T - 5-V RS-485 Transceiver

Product Overview

Texas Instruments

Datasheet Details

Part number	ISO3086T
Manufacturer	Texas Instruments
File Size	1.78 MB
Description	5-V RS-485 Transceiver
Datasheet	ISO3086T Datasheet
Additional preview pages of the ISO3086T datasheet.

Product details

Description

The ISO3086T is an isolated differential line transceiver with integrated oscillator outputs that provide the primary voltage for an isolation transformer.

Features

1 Meets or Exceeds TIA/EIA-485-A.
Signaling Rate up to 20 Mbps.
1/8 Unit Load.
Up to 256 Nodes on a Bus.
Thermal Shutdown Protection.
Typical Efficiency > 60% (ILOAD = 100 mA) - see SLUU469.
Low Bus Capacitance 7 pF (Typ).
50-kV/µs Typical Transient Immunity.
Fail-safe Receiver for Bus Open, Short, Idle.
Logic Inputs are 5-V Tolerant.
Bus-Pin ESD Protection.
11-kV HBM Between Bus-Pins and.

📁 Similar Datasheet

ISO-1001 - 0-+/-10VDC or 0-5V AC Signal Converter (YUAN)
ISO-200RMS-P2-O8 - 200mV AC or DC Small Signal Conversion (YUAN)
ISO-A1-Px-Ox - Dual Isolated Transmitter (Shenzhen Sunyuan)
ISO-A2-Px-Ox - Dual Isolated Transmitter (Shenzhen Sunyuan)
ISO-A3-Px-Ox - Dual Isolated Transmitter (Shenzhen Sunyuan)
ISO-A4-Px-Ox - Dual Isolated Transmitter (Shenzhen Sunyuan)
ISO-A5-Px-Ox - Dual Isolated Transmitter (Shenzhen Sunyuan)
ISO-Ax-Px-Ox - Photoelectricity Isolation (Shenzhen Sunyuan)

Other Datasheets by Texas Instruments

ISO3086 - 5-V Full- and Half-Duplex RS-485 Transceivers
ISO3080 - 5-V Full- and Half-Duplex RS-485 Transceivers
ISO3082 - 5-V Full- and Half-Duplex RS-485 Transceivers
ISO3088 - 5-V Full- and Half-Duplex RS-485 Transceivers
ISO35 - 3.3-V Half- and Full-Duplex RS-485 Transceivers
ISO35M - 3.3-V Half- and Full-Duplex RS-485 Transceivers

Published: Jul 2, 2023 |