ISO7821F Datasheet | Texas Instruments

Features - 1 Signaling Rate: Up to 100 Mbps - Wide Supply Range: 2.25 V to 5.5 V - 2.25 V to 5.5 V Level Translation - Wide Temperature Range: - 55°C to 125°C - Low Power Consumption, Typical 1.8 m A per Channel at 1 Mbps - Low Propagation Delay: 11 ns Typical (5 V Supplies) - Industry leading CMTI(Min): ±100 k V/μs - Robust Electromagnetic patibility (EMC) - System-Level ESD, EFT, and Surge Immunity - Low Emissions - Isolation Barrier Life: > 25 Years - SOIC-16 Wide Body (DW) and Extra-Wide Body (DWW) Package Options - Safety and Regulatory Approvals: - 8000 VPK Reinforced Isolation per DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 - 5.7 k VRMS Isolation for 1 minute per UL 1577 - CSA ponent Acceptance Notice 5A, IEC 60950-1 and IEC 60601-1 End Equipment Standards - CQC Certification per GB4943.1-2011 - TUV Certification per EN 61010-1 and EN 60950-1 - All DW Package Certifications plete; DWW Package Certifications plete per UL, TUV and Planned for VDE, CSA, and CQC 3 Description The ISO7821 is a high-performance, dual-channel digital isolator with 8000 VPK isolation voltage. This device has reinforced isolation certifications according to VDE, CSA, CQC, and TUV. The isolator provides high electromagnetic immunity and low emissions at low power consumption, while isolating CMOS or LVCMOS digital I/O’s. Each isolation channel has a logic input and output buffer separated by silicon dioxide (Si O2) insulation barrier. ISO7821 has one forward and one reverse-direction channel. If the input power or signal is lost, default output is 'high' for the ISO7821 and 'low' for the ISO7821F device. Used in conjunction with isolated power supplies, this device prevents noise currents on a data bus or other circuits from entering the local ground and interfering with or damaging sensitive circuitry. Through innovative chip design and layout techniques, electromagnetic patibility of ISO7821 has been significantly enhanced to ease system-level ESD, EFT, Surge and Emissions pliance....