LM10 Datasheet | Texas Instruments

Product Folder Sample & Buy Technical Documents Tools & Software Support & munity SNOSBH4E - MAY 1998 - REVISED OCTOBER 2015 LM10 Operational Amplifier and Voltage Reference 1 Features - 1 Input Offset Voltage: 2 m V (Maximum) - Input Offset Current: 0.7 n A (Maximum) - Input Bias Current: 20 n A (Maximum) - Reference Regulation: 0.1% (Maximum) - Offset Voltage Drift: 2 μV/°C - Reference Drift: 0.002%/°C 2 Applications - Remote Amplifiers - Battery-Level Indicators - Thermocouple Transmitters - Voltage and Current regulators 3 Description The LM10 series are monolithic linear ICs consisting of a precision reference, an adjustable reference buffer and an independent, high-quality operational amplifier. The unit can operate from a total supply voltage as low as 1.1 V or as high as 40 V, drawing only 270 μA. A plementary output stage swings within 15 m V of the supply terminals or will deliver ±20-m A output current with ±0.4-V saturation. Reference output can be as low as 200 m V. The circuit is remended for portable equipment and is pletely specified for operation from a single power cell. In contrast, high output-drive capability, both voltage and current, along with thermal overload protection, suggest it in demanding general-purpose applications. The device is capable of operating in a floating mode, independent of fixed supplies. It can function as a remote parator, signal conditioner, SCR controller or transmitter for analog signals, delivering the processed signal on the same line used to supply power. It is also suited for operation in a wide range of voltage and current regulator applications, from low voltages to several hundred volts, providing greater precision than existing ICs. This series is available in the three standard temperature ranges, with the mercial part having relaxed limits. In addition, a low-voltage specification (suffix L) is available in the limited temperature ranges at a cost savings. Device Information(1) PART...