LM239A-EP - QUAD DIFFERENTIAL COMPARATOR

Product Overview

Texas Instruments

Datasheet Details

Part number	LM239A-EP
Manufacturer	Texas Instruments
File Size	808.87 KB
Description	QUAD DIFFERENTIAL COMPARATOR
Datasheet	LM239A-EP Datasheet
Additional preview pages of the LM239A-EP datasheet.

Product details

Description

ORDERING INFORMATION These devices consist of four independent voltage comparators that are designed to operate from a single power supply over a wide range of voltages.Operation from dual supplies also is possible, as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input common-mode voltage.Current drain is independent of the supply voltage.The outputs can be connected to other open-collector outputs to achieve wired-AND relati

Features

1.
Wide Supply Ranges.
Single Supply: 2 V to 36 V (Tested to 30 V for Non-V Devices and 32 V for V-Suffix Devices).
Dual Supplies: ±1 V to ±18 V (Tested to ±15 V for Non-V Devices and ±16 V for V-Suffix Devices).
Low Supply-Current Drain Independent of Supply Voltage: 0.8 mA (Typ).
Low Input Bias Current: 25 nA (Typ).
Low Input Offset Current: 5 nA (Typ).
Low Input Offset Voltage: 2 mV (Typ).
Common-Mode Input Voltage Range.

📁 Similar Datasheet

LM239A - Voltage Comparators (National Semiconductor)
LM239 - Quad voltage comparator (NXP)
LM23088E - 2.30 inch 8x8 Dot Matrix LED Display (LIGHTKEY)
LM23088ED - 2.30 inch 8x8 Dot Matrix LED Display (LIGHTKEY)
LM23088EG - 2.30 inch 8x8 Dot Matrix LED Display (LIGHTKEY)
LM23088EO - 2.30 inch 8x8 Dot Matrix LED Display (LIGHTKEY)
LM23088EPG - 2.30 inch 8x8 Dot Matrix LED Display (LIGHTKEY)
LM23088ER - 2.30 inch 8x8 Dot Matrix LED Display (LIGHTKEY)

Other Datasheets by Texas Instruments

LM239A-Q1 - QUAD DIFFERENTIAL COMPARATOR
LM239-N - Low-Power Low-Offset Voltage Quad Comparators
LM239N - Quad Differential Comparators
LM231 - Precision Voltage-to-Frequency Converters
LM234 - 3-Terminal Adjustable Current Sources
LM235 - Precision Temperature Sensors

Published: Dec 31, 2019 |