LM2506 Datasheet (18-bit RGB Display Interface Serializer and Deserializer)

Part: LM2506
Manufacturer: Texas Instruments (official site)
Size: 0.99 MB

LM2506 Key Features

2 RGB Display Interface Support up to 800 x 300 ½SVGA Formats
MPL-Level 0 Physical Layer using Two Data and One Clock Signal
Low Power Consumption
Pinout Mirroring Enables Straight Through
Level Translation between Host and Display
Auto Power Down on STOP PCLK
Link Power Down Mode Reduces Quiescent
1.74V to 2.0V Core / Analog Supply Voltage
1.74V to 3.0V I/O Supply Voltage Range
30C to 85C Operating Temperature Range

Other LM2506 Datasheets

Manufacturer	Part Number	Description
National Semiconductor	LM2506	18-bit RGB Display Interface Serializer/Deserializer
National Semiconductor	LM25061	Positive Low Voltage Power Limiting Hot-Swap Controller
National Semiconductor Corporation	LM25066	System Power Management/Protection
National Semiconductor	LM25069	Positive Low Voltage Power Limiting Hot Swap Controller

View all LM2506 datasheets →

LM2506 Description

The LM2506 device adapts RGB style display interfaces to the Mobile Pixel Link (MPL) Level zero serial link. The LM2506 supports one RGB display at up to 18-bit color depth and 800 X 300 pixels (over 216 Mbps and 13.2 MHz PCLK) is supported. A mode pin configures the device as a Serializer (SER) or Deserializer (DES) so the same chip can be used on both sides of the interface.