Datasheet4U Logo Datasheet4U.com

LM2642 - Two-Phase Synchronous Step-Down Switching Controller

📥 Download Datasheet

General Description

The LM2642 consists of two current mode synchronous buck regulator controllers with a switching frequency of 300kHz.

The two switching regulator controllers operate 180° out of phase.

This

Overview

LM2642 www.ti.com SNVS203I – MAY 2002 – REVISED APRIL 2013 LM2642 Two-Phase Synchronous Step-Down Switching Controller Check for Samples:.

Key Features

  • 1.
  • 2 Two Synchronous Buck Regulators.
  • 180° Out of Phase Operation.
  • 4.5V to 30V Input Range.
  • Power Good Function Monitors Ch.1.
  • 37µA Shutdown Current.
  • 0.04% (typical) Line and Load Regulation Error.
  • Current Mode Control With or Without a Sense Resistor.
  • Independent Enable/Soft-start Pins Allow Simple Sequential Startup Configuration.
  • Configurable for Single Output Parallel Operation. (See Figure 3).
  • Adjusta.

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
National Semiconductor Logo LM2642 Two-Phase Synchronous Step-Down Switching Controller National Semiconductor
National Semiconductor Corporation Logo LM26420 High Frequency 2.0A Load - Step-Down DC-DC Regulator National Semiconductor Corporation

More Datasheets from Texas Instruments

Part Number Description
LM26420 High-Efficiency Synchronous DC/DC Converter
LM26420-Q1 High-Efficiency Synchronous DC/DC Converter
LM2640 Dual Adjustable Step-Down Switching Power Supply Controller
LM26400Y 500-kHz Wide Input Range Buck Regulator
LM2641 Dual Adjustable Step-Down Switching Power Supply Controller
LM2647 Dual Synchronous Buck Regulator Controller
LM26480 1.5-A Buck Regulators and Dual 300-mA LDO
LM26480-Q1 1.5-A Buck Regulators and Dual 300-mA LDO
LM26484 Power Management Unit
LM26 Factory-Preset Thermostat