LM293-EP Datasheet | Texas Instruments

FEATURES - Controlled Baseline - One Assembly - Test Site - One Fabrication Site - Extended Temperature Performance of - 55°C to 125°C - Enhanced Diminishing Manufacturing Sources (DMS) Support - Enhanced Product Change Notification - Qualification Pedigree (1) - Single Supply or Dual Supplies - Wide Range of Supply Voltage - Max Rating . . . 2 V to 36 V - Tested to 30 V (1) ponent qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range. This includes, but is not limited to, Highly Accelerated Stress Test (HAST) or biased 85/85, temperature cycle, autoclave or unbiased HAST, electromigration, bond intermetallic life, and mold-pound life. Such qualification testing should not be viewed as justifying use of this ponent beyond specified performance and environmental limits. - Low Supply-Current Drain Independent of Supply Voltage . . . 0.4 m A Typical Per parator - Low Input Bias Current . . . 25 n A Typical - Low Input Offset Voltage . . . 2 m V Typical - mon-Mode Input Voltage Range Includes Ground - Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . ±36 V - Low Output Saturation Voltage - Output patible With TTL, MOS, and CMOS LM293 . . . D PACKAGE (TOP VIEW) 1OUT 1 1IN- 2 1IN+ 3 GND 4 8 VCC 7 2OUT 6 2IN- 5 2IN+ DESCRIPTION /ORDERING INFORMATION This device consist of two independent voltage parators that are designed to operate from a single power supply over a wide range of voltages. Operation from dual supplies also is possible as long as the difference between the two supplies is 2 V to 36 V, and VCC is at least 1.5 V more positive than the input mon-mode voltage. Current drain is independent of the supply voltage. The outputs can be connected to other open-collector outputs to achieve wired-AND relationships. The LM293-EP is characterized for operation from - 55°C to 125°C. ORDERING INFORMATION(1) - 55°C to 125°C VIOmax AT 25°C 5 m V MAX VCC PACKAGE...