Datasheet4U Logo Datasheet4U.com

LM3000 - Dual Synchronous Emulated Current-Mode Controller

General Description

The LM3000 is a dual output synchronous buck controller which is designed to convert input voltages ranging from 3.3V to 18.5V down to output voltages as low as 0.6V.

Key Features

  • 1.
  • 2 VIN Range FROM 3.3V to 18.5V.
  • Output Voltage From 0.6V to 80% of VIN.
  • Remote Differential Output Voltage Sensing.
  • 1% Accuracy at FB Pin.
  • Interleaved Operation Reduces Input Capacitors.
  • Frequency Sync/Adjust From 200 kHz to 1.5 MHz.
  • Startup With Pre-Bias Load.
  • Independent Power Good, Enable, Soft-Start and Track.
  • Programmable Current Limit Without External Sense Resistor.
  • Hiccup Mode Short Circuit Protec.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM3000 www.ti.com SNVS612B – JULY 2009 – REVISED APRIL 2013 LM3000 Dual Synchronous Emulated Current-Mode Controller Check for Samples: LM3000 FEATURES 1 •2 VIN Range FROM 3.3V to 18.5V • Output Voltage From 0.6V to 80% of VIN • Remote Differential Output Voltage Sensing • 1% Accuracy at FB Pin • Interleaved Operation Reduces Input Capacitors • Frequency Sync/Adjust From 200 kHz to 1.5 MHz • Startup With Pre-Bias Load • Independent Power Good, Enable, Soft-Start and Track • Programmable Current Limit Without External Sense Resistor • Hiccup Mode Short Circuit Protection APPLICATIONS • DC Power Distribution Systems • Graphic Cards - GPU and Memory ICs • FPGA, CPLD, and ASICs • Embedded Processor • 1.8V and 2.