Datasheet4U Logo Datasheet4U.com

LM346 - Programmable Quad Operational Amplifiers

General Description

The LM146 series of quad op amps consists of four independent, high gain, internally compensated, low power, programmable amplifiers.

Key Features

  • 1.
  • 2 (ISET=10 μA).
  • Programmable Electrical Characteristics.
  • Battery-Powered Operation.
  • Low Supply Current: 350 μA/Amplifier.
  • Ensured Gain Bandwidth Product: 0.8 MHz Min.
  • Large DC Voltage Gain: 120 dB.
  • Low Noise Voltage: 28 nV/√Hz.
  • Wide Power Supply Range: ±1.5V to ±22V.
  • Class AB Output Stage.
  • No Crossover Distortion.
  • Ideal Pin Out for Biquad Active Filters.
  • Input Bias Currents are Temperature.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LM146, LM346 www.ti.com SNOSBH5B – MAY 2004 – REVISED SEPTEMBER 2004 LM146/LM346 Programmable Quad Operational Amplifiers Check for Samples: LM146, LM346 FEATURES 1 •2 (ISET=10 μA) • Programmable Electrical Characteristics • Battery-Powered Operation • Low Supply Current: 350 μA/Amplifier • Ensured Gain Bandwidth Product: 0.8 MHz Min • Large DC Voltage Gain: 120 dB • Low Noise Voltage: 28 nV/√Hz • Wide Power Supply Range: ±1.5V to ±22V • Class AB Output Stage–No Crossover Distortion • Ideal Pin Out for Biquad Active Filters • Input Bias Currents are Temperature Compensated DESCRIPTION The LM146 series of quad op amps consists of four independent, high gain, internally compensated, low power, programmable amplifiers.