Datasheet4U Logo Datasheet4U.com

LM3686 - Step-Down DC-DC Converter

Description

The LM3686 is a step-down DC-DC converter with a very low-dropout linear regulator and a low-noise linear regulator optimized for powering ultra-low voltage circuits.

It provides three outputs with combined load current up to 900 mA over an input voltage range from 2.7 V to 5.5 V.

Features

  • 1 DC-DC Regulator.
  • VOUT_DCDC = 1.2 V to 2.5 V.
  • 600-mA Maximum ILOAD.
  • 3-MHz Typical PWM Fixed Switching Frequency.
  • Automatic PFM/PWM Mode Switching.
  • Internal Synchronous Rectification.
  • Internal Soft Start.
  • Dual-Rail Linear Regulator: LILO.
  • Load Transients < 50-mV Peak Typical.
  • Line Transients < 1-mV Peak Typical.
  • VOUT_LILO = 0.7 V to 2 V.
  • 70-µA Typical IQ and 300-mA Maximum ILOAD.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community LM3686 SNVS520F – AUGUST 2008 – REVISED NOVEMBER 2016 LM3686 Step-Down DC-DC Converter With Integrated Post Linear Regulators System And Low-Noise Linear Regulator 1 Features •1 DC-DC Regulator – VOUT_DCDC = 1.2 V to 2.5 V – 600-mA Maximum ILOAD – 3-MHz Typical PWM Fixed Switching Frequency – Automatic PFM/PWM Mode Switching – Internal Synchronous Rectification – Internal Soft Start • Dual-Rail Linear Regulator: LILO – Load Transients < 50-mV Peak Typical – Line Transients < 1-mV Peak Typical – VOUT_LILO = 0.7 V to 2 V – 70-µA Typical IQ and 300-mA Maximum ILOAD • Linear Regulator: LDO – Load Transients < 80-mV Peak Typical – Line Transients < 1-mV Peak Typical – VOUT_LDO = 1.5 V to 3.
Published: |