Datasheet4U Logo Datasheet4U.com

LM3915 Datasheet Dot/Bar Display Driver

Manufacturer: Texas Instruments

📥 Download Datasheet

General Description

The LM3915 is a monolithic integrated circuit that senses analog voltage levels and drives ten LEDs, LCDs or vacuum fluorescent displays, providing a logarithmic 3 dB/step analog display.

One pin changes the display from a bar graph to a moving dot display.

LED current drive is regulated and programmable, eliminating the need for current limiting resistors.

Overview

LM3915 www.ti.com SNVS740C – JANUARY 2000 – REVISED MARCH 2013 LM3915 Dot/Bar Display Driver Check for Samples:.

Key Features

  • 1.
  • 2 3 dB/step, 30 dB Range.
  • Drives LEDs, LCDs, or Vacuum Fluorescents.
  • Bar or Dot Display Mode Externally Selectable by User.
  • Expandable to Displays of 90 dB.
  • Internal Voltage Reference from 1.2V to 12V.
  • Operates with Single Supply of 3V to 25V.
  • Inputs Operate Down to Ground.
  • Output Current Programmable from 1 mA to 30 mA.
  • Input Withstands ±35V without Damage or False Outputs.
  • Outputs are Current Regulated,.

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
National Semiconductor Logo LM3915 Dot/Bar Display Driver National Semiconductor
National Semiconductor Logo LM3915N Dot/Bar Display Driver National Semiconductor

More Datasheets from Texas Instruments

Part Number Description
LM3915N Dot/Bar Display Driver
LM3914 Dot/Bar Display Driver
LM3916 Dot/Bar Display Driver
LM3900 QUADRUPLE NORTON OPERATIONAL AMPLIFIER
LM392 LOW-POWER OPERATIONAL AMPLIFIER AND VOLTAGE COMPARATOR
LM392-N LOW-POWER OPERATIONAL AMPLIFIER AND VOLTAGE COMPARATOR
LM393 Dual Differential Comparators
LM393-N Low-Power Low-Offset Voltage Dual Comparators
LM393A Dual Differential Comparators
LM393AP Dual Differential Comparators