900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

LM48411 Datasheet Preview

LM48411 Datasheet

Audio Power Amplifier

No Preview Available !

LM48411
www.ti.com
SNAS399G – SEPTEMBER 2007 – REVISED MAY 2013
LM48411
Ultra-Low EMI, Filterless, 2.5W, Stereo, Class D
Audio Power Amplifier with E2S
Check for Samples: LM48411
FEATURES
1
2 E2S System Reduces EMI Preserving Audio
Quality and Efficiency
• Output Short Circuit Protection
• Stereo Class D Operation
• No Output Filter Required for Inductive Loads
• Logic Selectable Gain
• Independent Shutdown Control
• Minimum External Components
• "Click and Pop" Suppression Circuitry
• Micro-Power Shutdown Mode
• Available in Space-Saving 0.5mm Pitch
DSBGA Package
APPLICATIONS
• Mobile Phones
• PDAs
• Portable Electronic Devices
KEY SPECIFICATIONS
• Efficiency at 3.6V, 500mW into 8Speaker:
87% (typ)
• Efficiency at 3.6V, 100mW into 8Speaker:
80% (typ)
• Efficiency at 5V, 1W into 8Speaker:
88% (typ)
• Quiescent Current, 3.6V Supply: 4.2mA (typ)
• Power Output at VDD = 5V RL = 4, THD 10%:
2.5W (typ)
• Power Output at VDD = 5V RL = 8, THD 10%:
1.5W (typ)
• Total Shutdown Power Supply Current:
0.01µA (typ)
• Single Supply Range: 2.4V to 5.5V
DESCRIPTION
The LM48411 is a single supply, high efficiency,
2.5W/channel Class D audio amplifier. The LM48411
features TI's Enhanced Emissions Suppression (E2S)
system, that features a unique patent-pending ultra
low EMI, spread spectrum, PWM architecture, that
significantly reduces RF emissions while preserving
audio quality and efficiency. The E2S system
improves battery life, reduces external component
count, board area consumption, system cost, and
simplifying design.
The LM48411 is designed to meet the demands of
mobile phones and other portable communication
devices. Operating on a single 5V supply, it is
capable of delivering 2.5W/channel of continuous
output power to a 4load with less than 10%
THD+N. Its flexible power supply requirements allow
operation from 2.4V to 5.5V. The wide band spread
spectrum architecture of the LM48411 reduces EMI-
radiated emissions due to the modulator frequency.
The LM48411 features high efficiency compared to a
conventional Class AB amplifier. The E2S system
includes an advanced, patent-pending edge rate
control (ERC) architecture that further reduce
emissions by minimizing the high frequency
component of the device output, while maintaining
high quality audio reproduction and high efficiency (η
= 87% at VDD = 3.6V, PO = 500mW). Four gain
options are pin selectable through GAIN0 and GAIN1
pins.
The LM48411 features a low-power consumption
shutdown mode. Shutdown may be enabled by
driving the Shutdown pin to a logic low (GND).
Output short circuit protection prevents the device
from being damaged during fault conditions. Superior
click and pop suppression eliminates audible
transients on power up/down and during shutdown.
Independent left/right shutdown control maximizes
power savings in mixed mono/stereo applications.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2007–2013, Texas Instruments Incorporated




etcTI

LM48411 Datasheet Preview

LM48411 Datasheet

Audio Power Amplifier

No Preview Available !

LM48411
SNAS399G – SEPTEMBER 2007 – REVISED MAY 2013
LM48411 RF Emissions
Typical Application
50.0
FCC Class B Limit
45.0
40.0
35.0
30.0
LM48411TL Output Spectrum
25.0
20.0
15.0
10.0
30.0
80.0 120.0 160.0 200.0 240.0 280.0
FREQUENCY (MHz)
Figure 1. RF Emissions — 3in cable
2.4V to 5.5V
CS1
CS2
AUDIO
INPUT
Ci
INR+
Ci
INR-
SDR
GAIN0
GAIN1
AUDIO
INPUT
SDL
Ci
INL+
Ci
INL-
VDD
PVDD
GAIN/
MODULATOR
H-BRIDGE
OUTRA
OUTRB
OSCILLATOR
GAIN/
MODULATOR
H-BRIDGE
GND
PGND
OUTLA
OUTLB
www.ti.com
Figure 2. Typical Audio Amplifier Application Circuit
2
Submit Documentation Feedback
Product Folder Links: LM48411
Copyright © 2007–2013, Texas Instruments Incorporated


Part Number LM48411
Description Audio Power Amplifier
Maker etcTI
PDF Download

LM48411 Datasheet PDF






Similar Datasheet

1 LM4841 Stereo 2W Amplifiers
National Semiconductor
2 LM48410 Audio Power Amplifier
etcTI
3 LM48411 Audio Power Amplifier
etcTI
4 LM48413 Audio Power Amplifier
etcTI
5 LM48413 1.2W Stereo Class D Audio Power Amplifier
National Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy