LM5141-Q1
LM5141-Q1 is Wide Input Range Synchronous Buck Controller manufactured by Texas Instruments.
Features
- 1 Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1:
- 40°C to +125°C Ambient Operating Temperature
- Device HBM ESD Classification Level 2
- Device CDM ESD Classification Level C4B
- VIN: 3.8 V to 65 V (70 V Absolute Maximum)
- Output: Fixed 3.3 V, 5 V, or Adjustable From
1.5 V to 15 V with ±0.8% Accuracy
- Fixed 2.2-MHz or 440-k Hz Switching Frequency with ±5% Accuracy
- High-Side and Low-Side Gate Drive With Slew-
Rate Control
- Optional Frequency Shift by Varying an Analog
Voltage or RT Resistor
- Optional Synchronization to an External Clock
- Optional Spread Spectrum
- Shutdown Mode IQ: 10 µA Typical
- Low Standby Mode IQ: 35 µA Typical
- 75-m V Current Limit Threshold with ±0.9%
Accuracy
- External Resistor or DCR Current Sensing
- Output Enable Logic Input
- Hiccup Mode for Sustained Overload
- Power-Good Indication Output
- Selectable Diode Emulation or Forced Pulse-
Width Modulation
- 24-pin VQFN Package With Wettable Flanks
- Create a Custom Design Using the LM5141-Q1
With the WEBENCH® Power Designer
2 Applications
- Automotive Applications Including:
- Infotainment Systems
- Instrumentation Clusters
- Advanced Driver Assistance Systems (ADAS)
3 Description
The LM5141-Q1 is a synchronous buck controller, intended for high voltage wide VIN step-down converter applications. The control method is peak current mode control. Current mode control provides inherent line feed-forward, cycle-by-cycle current limiting, and ease-of-loop pensation. The LM5141-Q1 features slew rate control to simplify the pliance with CISPR and automotive EMI requirements.
The LM5141-Q1 has two selectable switching frequencies: 2.2 MHz and 440 k Hz. Gate drivers with slew rate Control that can be adjusted to reduce EMI.
In light or no-load conditions, the LM5141-Q1 operates in skip cycle mode for improved low power efficiency. The LM5141-Q1 has a high voltage bias regulator with automatic switch-over to an...
