900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

LM6171 Datasheet Preview

LM6171 Datasheet

Voltage Feedback Amplifier

No Preview Available !

LM6171
www.ti.com
SNOS745C – MAY 1998 – REVISED MARCH 2013
LM6171 High Speed Low Power Low Distortion Voltage Feedback Amplifier
Check for Samples: LM6171
FEATURES
1
23 (Typical Unless Otherwise Noted)
• Easy-To-Use Voltage Feedback Topology
• Very High Slew Rate: 3600V/μs
• Wide Unity-Gain-Bandwidth Product: 100 MHz
3dB Frequency @ AV = +2: 62 MHz
• Low Supply Current: 2.5 mA
• High CMRR: 110 dB
• High Open Loop Gain: 90 dB
• Specified for ±15V and ±5V Operation
APPLICATIONS
• Multimedia Broadcast Systems
• Line Drivers, Switchers
• Video Amplifiers
• NTSC, PAL® and SECAM Systems
• ADC/DAC Buffers
• HDTV Amplifiers
• Pulse Amplifiers and Peak Detectors
• Instrumentation Amplifier
• Active Filters
DESCRIPTION
The LM6171 is a high speed unity-gain stable voltage
feedback amplifier. It offers a high slew rate of
3600V/μs and a unity-gain bandwidth of 100 MHz
while consuming only 2.5 mA of supply current. The
LM6171 has very impressive AC and DC
performance which is a great benefit for high speed
signal processing and video applications.
The ±15V power supplies allow for large signal
swings and give greater dynamic range and signal-to-
noise ratio. The LM6171 has high output current
drive, low SFDR and THD, ideal for ADC/DAC
systems. The LM6171 is specified for ±5V operation
for portable applications.
The LM6171 is built on TI's advanced VIP III
(Vertically Integrated PNP) complementary bipolar
process.
CONNECTION DIAGRAM
Figure 1. Top View
8-Pin SOIC/PDIP
See Package Number D (SOIC) or
See Package Number P (PDIP)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PAL is a registered trademark of and used under lisence from Advanced Micro Devices, Inc..
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 1998–2013, Texas Instruments Incorporated




etcTI

LM6171 Datasheet Preview

LM6171 Datasheet

Voltage Feedback Amplifier

No Preview Available !

LM6171
SNOS745C – MAY 1998 – REVISED MARCH 2013
www.ti.com
Absolute Maximum Ratings(1)(2)
ESD Tolerance(3)
Supply Voltage (V+–V)
Differential Input Voltage
Common-Mode Voltage Range
Input Current
Output Short Circuit to Ground(4)
Storage Temperature Range
Maximum Junction Temperature(5)
Soldering Information
Infrared or Convection Reflow
(20 sec.)
Wave Soldering Lead Temp
(10 sec.)
2.5 kV
36V
±10V
V++0.3V to V0.3V
±10mA
Continuous
65°C to +150°C
150°C
235°C
260°C
(1) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/Distributors for availability and
specifications.
(2) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test
conditions, see the Electrical Characteristics.
(3) Human body model, 1.5 kΩ in series with 100 pF.
(4) Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature
of 150°C.
(5) The maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(max) TA)/θJA. All numbers apply for packages soldered directly into a PC board.
Operating Ratings(1)
Supply Voltage
Operating Temperature Range
Thermal Resistance (θJA)
LM6171AI, LM6171BI
P Package, 8-Pin PDIP
D Package, 8-Pin SOIC
5.5V VS 34V
40°C to +85°C
108°C/W
172°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test
conditions, see the Electrical Characteristics.
2
Submit Documentation Feedback
Product Folder Links: LM6171
Copyright © 1998–2013, Texas Instruments Incorporated


Part Number LM6171
Description Voltage Feedback Amplifier
Maker etcTI
PDF Download

LM6171 Datasheet PDF






Similar Datasheet

1 LM6171 High Speed Low Power Low Distortion Voltage Feedback Amplifier
National Semiconductor
2 LM6171 Voltage Feedback Amplifier
etcTI
3 LM6172 Dual High Speed/ Low Power/ Low Distortion/ Voltage Feedback Amplifiers
National Semiconductor
4 LM6172 Voltage Feedback Amplifier
etcTI
5 LM6172QML Voltage Feedback Amplifier
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy