LM95010 Overview
The LM95010 is a digital output temperature sensor that has single-wire interface patible with the SensorPath interface. It uses a ΔVbe analog temperature sensing technique that generates a differential voltage that is proportional to temperature. This voltage is digitized using a Sigma-Delta analogto-digital converter. The LM95010 is part of a hardware monitor system, prised of two parts: the PC System Health Controller (Master), such as a Super I/O, and up to seven slaves of which four can be LM95010s. Using SensorPath, the LM95010 will be controlled by the master and report to the master its own die temperature. SensorPath data is pulse width encoded, thereby allowing the LM95010 to be easily connected to many general purpose microcontrollers. Block Diagram LM95010 ADDRESS POINTER REGISTER +3.3V_SBY GND V+ (Power) MANUFACTURER ID REGISTER REVISION AND DEVICE ID REGISTER CAPABILITIES...
LM95010 Key Features
- 23 SensorPath Bus
- 4 Hardware Programmable Addresses
- Temperature Sensing
- 0.25 °C Resolution
- 127.75 °C Maximum Temperature Reading
- 8-Lead VSSOP Package
