LMH1219
Features
- 1 Supports ST-2082-1(12G), ST-2081-1(6G), ST424(3G), ST-292(HD), and ST-259(SD)
- Supports SFF8431 (SFP+) for SMPTE 2022-5/6
- patible with DVB-ASI and AES10 (MADI)
- Integrated Reference-Less Reclocker Locks to
SMPTE and 10Gb E Rate: 11.88 Gbps, 5.94 Gbps, 2.97 Gbps, 1.485 Gbps, or Divide-by-1.001 Sub Rates, 270 Mbps and 10.3125 Gbps
- Adaptive Cable Equalizer at Input 0 (IN0)
- Cable Reach (Belden 1694A):
- 75 m at 11.88 Gbps (4Kp60 UHD)
- 120 m at 5.94 Gbps (UHD)
- 200 m at 2.97 Gbps (FHD)
- 280 m at 1.485 Gbps (HD)
- 600 m at 270 Mbps (SD)
- Adaptive Board Trace Equalizer at Input 1 (IN1)
- Low Power: 250 m W (Typical)
- Power Saving Mode: 16 m W
- Integrated Input Return Loss Network
- 2:1 Input Mux, 1:2 Fanout Output With De Emphasis
- Supports Signal Splitter Mode (- 6 d B Launch Amplitude)
- On-Chip Loop Filter Capacitor and Eye Monitor
- Powers from Single 2.5 V with On-Chip 1.8 V Regulator
- Configurable by Control Pins, SPI, or SMBus Interface
- 4 mm × 4 mm 24-pin QFN...
