Datasheet4U Logo Datasheet4U.com

LMH6553 - 900MHz Fully Differential Amplifier

Description

The LMH6553 is a 900 MHz differential amplifier with an integrated adjustable output limiting clamp.

The clamp increases system performance and provides transient over-voltage protection to following stages.

Features

  • 1.
  • 23 900 MHz.
  • 3 dB Small Signal Bandwidth @ AV = 1.
  • 670 MHz.
  • 3 dB Large Signal Bandwidth @ AV = 1.
  • 79 dB THD @ 20 MHz.
  • 92 dB IMD3 @ fc = 20 MHz.
  • 10 ns Settling Time to 0.1%.
  • 600 ps Clamp Overdrive Recovery Time.
  • 40 mV Clamp Accuracy with 100% Overdrive.
  • 0.1 mV/°C Clamp Temperature Drift.
  • 4.5 to 12 Supply Voltage Operation.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LMH6553 900MHz Fully Differential Amplifier National Semiconductor
LMH6550 Differential / High Speed Op Amp National Semiconductor
LMH6551 High Speed Op Amp National Semiconductor
LMH6552 1 GHz Fully Differential Amplifier National Semiconductor
LMH6555 Low Distortion 1.2 GHz Differential Driver National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LMH6550 High-Speed Operational Amplifier
LMH6551 High-Speed Op Amp
LMH6551Q High-Speed Op Amp
LMH6552 1.5-GHz Fully Differential Amplifier
LMH6554 2.8-GHz Ultra Linear Fully Differential Amplifier

Full PDF Text Transcription

Click to expand full text
LMH6553 www.ti.com SNOSB07H – SEPTEMBER 2008 – REVISED MARCH 2013 LMH6553 900 MHz Fully Differential Amplifier With Output Limiting Clamp Check for Samples: LMH6553 FEATURES 1 •23 900 MHz −3 dB Small Signal Bandwidth @ AV = 1 • 670 MHz −3 dB Large Signal Bandwidth @ AV = 1 • −79 dB THD @ 20 MHz • −92 dB IMD3 @ fc = 20 MHz • 10 ns Settling Time to 0.1% • 600 ps Clamp Overdrive Recovery Time • 40 mV Clamp Accuracy with 100% Overdrive • −0.1 mV/°C Clamp Temperature Drift • 4.
Published: |