900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

LP2902 Datasheet Preview

LP2902 Datasheet

ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS

No Preview Available !

www.ti.com
LP324, LP2902
ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS460A – MARCH 2005 – REVISED MAY 2005
FEATURES
Low Supply Current . . . 85 µA Typ
Low Offset Voltage . . . 2 mV Typ
Low Input Bias Current . . . 2 nA Typ
Input Common Mode to GND
Wide Supply Voltage . . . 3 V < VCC < 32 V
Pin Compatible With LM324
Applications
– LCD Displays
– Portable Instrumentation
– Sensor/Metering Equipment
– Consumer Electronics (MP3 Players, Toys,
Etc.)
– Power Supplies
D, N, OR PW PACKAGE
(TOP VIEW)
1OUT
1IN−
1IN+
VCC
2IN+
2IN−
2OUT
1
2
3
4
5
6
7
14 4OUT
13 4IN−
12 4IN+
11 GND
10 3IN+
9 3IN−
8 3OUT
DESCRIPTION/ORDERING INFORMATION
The LP324 and LP2902 are quadruple low-power operational amplifiers especially suited for battery-operated
applications. Good input specifications and wide supply-voltage range still are achieved, despite the ultra-low
supply current. Single-supply operation is achieved with an input common-mode range that includes GND.
The LP324 and LP2902 are ideal in applications where wide supply voltage and low power are more important
than speed and bandwidth. These applications include portable instrumentation, LCD displays, consumer
electronics (MP3 players, toys, etc.), and power supplies.
TA
0°C to 70°C
–40°C to 85°C
PDIP – N
SOIC – D
TSSOP – PW
PDIP – N
SOIC – D
TSSOP – PW
ORDERING INFORMATION
PACKAGE (1)
ORDERABLE PART NUMBER
Tube of 25
LP324N
Tube of 50
LP324D
Reel of 2500
LP324DR
Tube of 90
LP324PW
Reel of 2000
LP324PWR
Tube of 25
LP2902N
Tube of 50
LP2902D
Reel of 2500
LP2902DR
Tube of 50
LP2902PW
Reel of 2500
LP2902PWR
TOP-SIDE MARKING
LP324N
LP324
LP324
LP2902N
LP2902
LP2902
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
SYMBOL (EACH AMPLIFIER)
IN−
OUT
IN+
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2005, Texas Instruments Incorporated




etcTI

LP2902 Datasheet Preview

LP2902 Datasheet

ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS

No Preview Available !

LP324, LP2902
ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS
SLOS460A – MARCH 2005 – REVISED MAY 2005
SCHEMATIC (EACH AMPLIFIER)
www.ti.com
VCC
OUT
IN−
IN+
Absolute Maximum Ratings(1)
over operating free-air temperature range (unless otherwise noted)
VCC Supply voltage range(2)
VID Differential input voltage(3)
VI Input voltage (either input)
Duration of output short circuit (one amplifier) to ground at (or below) TA = 25°C, VCC 15 V(4)
D package
θJA Package thermal impedance(5)(6)
N package
PW package
TJ Operating virtual junction temperature
Tstg Storage temperature range
MIN MAX UNIT
±16 or 32 V
±32 V
–0.3 32 V
Unlimited
86
80 °C/W
113
150 °C
–65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values (except differential voltages and VCC specified for the measurement of IOS) are with respect to the network GND.
(3) Differential voltages are at IN+, with respect to IN–.
(4) Short circuits from outputs to VCC can cause excessive heating and eventual destruction.
(5) Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
ESD Protection
Human-Body Model
TEST CONDITIONS
TYP UNIT
±2 kV
2


Part Number LP2902
Description ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS
Maker etcTI
Total Page 13 Pages
PDF Download

LP2902 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 LP2901 Low-Power Quad Differential Comparator
etcTI
2 LP2901-Q1 Low-Power Quad Differential Comparator
etcTI
3 LP2902 Micropower Quad Operational Amplifier
National Semiconductor
4 LP2902 ULTRA-LOW-POWER QUADRUPLE OPERATIONAL AMPLIFIERS
etcTI
5 LP2902-N Micropower Quad Operational Amplifier
etcTI
6 LP2904 Ultra-Low Power Dual Operational Amplifiers
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy