Datasheet4U Logo Datasheet4U.com

LP5891 - Common Cathode LED Matrix Driver

General Description

The LP5891 is a highly integrated, common-cathode LED matrix driver with 48 constant current sources and 16 scanning FETs.

Key Features

  • Separated VCC and VR/G/B power supply.
  • VCC voltage range: 2.5 V.
  • 5.5 V.
  • VR/G/B voltage range: 2.5 V.
  • 5.5 V.
  • 48 current source channels from 0.2 mA to 20 mA.
  • Channel-to-channel accuracy: ±0.5% (typ. ), ±2% (max. ); device-to-device accuracy: ±0.5% (typ. ), ±2% (max. ).
  • Low knee voltage: 0.26 V (max. ) when IOUT = 5 mA.
  • 3-bits (8 steps) global brightness control.
  • 8-bits (256 steps) color brightness control.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LP5890 USB identification current limiting LANDP
LP584374F Lithium Iron Phosphate Battery EEMB
LP5889 Dual USB Identification LANDP
LP5004 1000Base-T Magnetics Link-PP
LP5007 1000Base-T Magnetics Link-PP

Other Datasheets by Texas Instruments

Part Number Description
LP5810 4-Channel RGBW LED Driver
LP5009 12-Bit PWM Ultra-low Quiescent Current I2C RGB LED Drivers
LP5012 12-Bit PWM Ultra-low Quiescent Current I2C RGB LED Drivers
LP5018 I2C RGB LED Drivers
LP5024 I2C RGB LED Drivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LP5891 SLDS269A – MARCH 2022 – REVISED MAY 2022 LP5891 48 Current Sources, 64 Scans, Common Cathode LED Matrix Driver 1 Features • Separated VCC and VR/G/B power supply – VCC voltage range: 2.5 V–5.5 V – VR/G/B voltage range: 2.5 V–5.5 V • 48 current source channels from 0.2 mA to 20 mA – Channel-to-channel accuracy: ±0.5% (typ.), ±2% (max.); device-to-device accuracy: ±0.5% (typ.), ±2% (max.) – Low knee voltage: 0.26 V (max.) when IOUT = 5 mA – 3-bits (8 steps) global brightness control – 8-bits (256 steps) color brightness control – Maximum 16-bits (65536 steps) PWM grayscale control • 16 scan line switches with 190-mΩ RDS(ON) • Ultra-low power consumption – Independent VCC down to 2.5 V – Lowest ICC down to 3.6 mA with 50-MHz GCLK – Intelligent power saving mode with ICC down to 0.