Datasheet4U Logo Datasheet4U.com

LPV531 - Rail-to-Rail Output Operational Amplifier

General Description

The LPV531 is an extremely versatile operational amplifier.

A single external resistor gives the system designer the ability to define the quiescent current, gain bandwidth product and output short circuit current.

Key Features

  • 1.
  • 2 (Typical 5V Supply, unless otherwise Noted. ).
  • Supply Voltage 2.7V to 5.5V.
  • Dynamic Power Mode Setting.
  • Continuously Programmable Supply Current.
  • Range 5 μA to 425 μA.
  • Continuously Programmable Bandwidth.
  • Range 73 kHz to 4.6 MHz.
  • Input Common Mode Voltage Range.
  • 0.3V to 3.8V.
  • CMRR 95 dB.
  • Rail-to-Rail Output Voltage Swing.
  • Input Offset Voltage 1 mV.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LPV531 Rail-to-Rail Output Operational Amplifier National Semiconductor
LPV511 Rail-to-Rail Input and Output Operational Amplifier National Semiconductor
LPV521 Operational Amplifier National Semiconductor Corporation
LPV1500 PACKAGED LOW NOISE PHEMT Filtronic Compound Semiconductors
LPV3000 2W Power PHEMT Filtronic Compound Semiconductors

Other Datasheets by Texas Instruments

Part Number Description
LPV511 Rail-to-Rail Input and Output Operational Amplifier
LPV521 Operational Amplifier
LPV542 RRIO CMOS Operational Amplifier
LPV321-N Single General-Purpose Rail-to-Rail Output Operational Amplifier
LPV324-N Quad General-Purpose Rail-to-Rail Output Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LPV531 www.ti.com SNOSAK5B – MARCH 2006 – REVISED MARCH 2013 LPV531 Programmable Micropower CMOS Input, Rail-to-Rail Output Operational Amplifier Check for Samples: LPV531 FEATURES 1 •2 (Typical 5V Supply, unless otherwise Noted.) • Supply Voltage 2.7V to 5.5V • Dynamic Power Mode Setting • Continuously Programmable Supply Current – Range 5 μA to 425 μA • Continuously Programmable Bandwidth – Range 73 kHz to 4.6 MHz • Input Common Mode Voltage Range −0.3V to 3.8V • CMRR 95 dB • Rail-to-Rail Output Voltage Swing • Input Offset Voltage 1 mV APPLICATIONS • AC Coupled Circuits • Portable Instrumentation • Active Filters Typical Application C1 R1 VIN R2 R3 +V R4 - + ISEL REXT C2 VOUT DESCRIPTION The LPV531 is an extremely versatile operational amplifier.