Datasheet4U Logo Datasheet4U.com

LT1030C - QUADRUPLE LOW-POWER LINE DRIVER

Description

The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low supply current.

The device can be shut down to zero supply current.

Current limiting fully protects the outputs from externally applied voltages of ±30 V.

📥 Download Datasheet

Datasheet preview – LT1030C

Datasheet Details

Part number LT1030C
Manufacturer Texas Instruments
File Size 524.04 KB
Description QUADRUPLE LOW-POWER LINE DRIVER
Datasheet download datasheet LT1030C Datasheet
Additional preview pages of the LT1030C datasheet.

📁 Similar Datasheet

  • LT1030CS - Quad Low Power Line Driver (Linear Technology)
  • LT1030 - Quad Low Power Line Driver (Linear Technology)
  • LT103 - LT Series: 25/30 WATT Wide Input Range (ETC)
  • LT1031 - Precision 10 Volt Reference (Linear Technology)
  • LT1032 - Quad Low Power Line Driver (Linear Technology)
  • LT1033 - 3A Negative Adjustable Regulator (Linear Technology)
  • LT1034-1.2 - Micropower Dual Reference (Linear)
  • LT1034-2.5 - Micropower Dual Reference (Linear)
  • LT1035C - Logic Controlled Regulator (Linear)
  • LT1035M - Logic Controlled Regulator (Linear)
Other Datasheets by Texas Instruments
  • LT1037 - PRECISION OPERATIONAL AMPLIFIERS
  • LT1037A - PRECISION OPERATIONAL AMPLIFIERS
  • LT1039 - Triple EIA-232 Line Transceiver
  • LT1004-1.2 - Micropower Integrated Voltage References
  • LT1004-2.5 - Micropower Integrated Voltage References
  • LT1007 - PRECISION OPERATIONAL AMPLIFIERS
  • LT1007A - PRECISION OPERATIONAL AMPLIFIERS
  • LT1009 - 2.5-V INTEGRATED REFERENCE CIRCUIT

Full PDF Text Transcription

Click to expand full text
LT1030C QUADRUPLE LOW-POWER LINE DRIVER D Low Supply Voltage . . . ±5 V to ±15 V D Supply Current . . . 500 µA Typical D Zero Supply Current When Shut Down D Outputs Can Be Driven ±30 V D Output Open When Off (3-State) D 10-mA Output Drive D Outputs of Several Devices Can Be Connected in Parallel D Meets or Exceeds the Requirements of ANSI EIA/TIA-232-F Specifications D Designed to Be Interchangeable With Linear Technology LT1030 SLLS048F – APRIL 1989 – REVISED APRIL 1998 D OR N PACKAGE (TOP VIEW) VCC– 1 IN1 2 OUT1 3 ON/OFF 4 IN2 5 OUT2 6 GND 7 14 VCC+ 13 STROBE 12 IN4 11 OUT4 10 NC 9 IN3 8 OUT3 NC – No internal connection description The LT1030C is an EIA/TIA-232-F line driver that operates over a ±5-V to ±15-V supply-voltage range on low supply current.
Published: |