MAX202I Datasheet | Texas Instruments

Features - Meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards - ESD protection for RS-232 bus pins: ±15k V human-body model - Operates at 5V VCC supply - Operates up to 120kbit/s - Two drivers and two receivers - Latch-up performance exceeds 100m A Per JESD 78, class II 2 Applications - Battery-powered systems - Notebooks - Laptops - Palmtop PCs - Hand-held equipment 3 Description The MAX202 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15k V ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous munication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The device operates at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate. Package Information PART NUMBER PACKAGE(1) PACKAGE SIZE(2) SOIC (D) (16) 9.9mm × 6mm MAX202 SOIC WIDE (DW) (16) 10.4mm × 10.3mm TSSOP (PW) (16) 5 mm x 6.4mm (1) For more Information, see Section 10. (2) The package size (length × width) is a nominal value and includes pins, where applicable. 5V POWER DOUT RS-232 ROUT 120 kb/s 15 k V HBM RS-232 Copyright © 2016, Texas Instruments...