900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

MAX4594 Datasheet Preview

MAX4594 Datasheet

SINGLE-CHANNEL SPST ANALOG SWITCH

No Preview Available !

www.ti.com
MAX4594
SINGLEĆCHANNEL 10ĆW SPST ANALOG SWITCH
SLLS639 − JANUARY 2005
Description
The MAX4594 is a single-pole single-throw (SPST)
analog switch that is designed to operate from 2 V to
5.5 V. This device can handle both digital and analog
signals, and signals up to V+ can be transmitted in either
direction.
Applications
D Sample-and-Hold Circuits
D Battery-Powered Equipment
(Cellular Phones, PDAs)
D Audio and Video Signal Routing
D Communication Circuits
D PCMCIA Cards
SOT-23 OR SC-70 PACKAGE
(TOP VIEW)
COM 1
NO 2
GND 3
5 V+
4 IN
FUNCTION TABLE
NO TO COM,
IN COM TO NO
L OFF
H ON
Features
D Low ON-State Resistance (10 W)
D ON-State Resistance Flatness (1.5 W)
D Control Inputs Are 5.5-V Tolerant
D Low Charge Injection (5 pC Max)
D 300-MHz −3-dB Bandwidth at 255C
D Low Total Harmonic Distortion (THD) (0.05%)
D 2-V to 5.5-V Single-Supply Operation
D Specified at 5-V and 3.3-V Nodes
D −80-dB OFF Isolation at 1 MHz
D Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
D 0.5-nA Max OFF Leakage
D ESD Performance Tested Per JESD 22
− 2000-V Human-Body Model
(A114-B, Class II)
− 1000-V Charged-Device Model (C101)
D TTL/CMOS-Logic Compatible
Summary of Characteristics
V+ = 5 V, TA = 25°C
Configuration
Single Pole
Single Throw
(SPST)
Number of channels
1
ON-state resistance (ron)
ON-state resistance flatness (ron(flat))
Turn-on/turn-off time (tON/tOFF)
Charge injection (QC)
Bandwidth (BW)
10
1.5
35 ns/40 ns
5 pC
300 MHz
OFF isolation (OISO)
Total harmonic distortion (THD)
−80 dB at 1 MHz
0.05%
Leakagecurrent(ICOM(OFF)/INO(OFF))
Power-supply current (I+)
Package option
±0.05 nA
1 µA
5-pin SOT-23 or SC-70
ORDERING INFORMATION
TA
PACKAGE(1)
ORDERABLE PART NUMBER
TOP-SIDE MARKING(2)
−40°C to 85°C
SOT (SOT-23) − DBV
SOT (SC−70) − DCK
Tape and reel
Tape and reel
MAX4594DBVR
MAX4594DCKR
6SA_
SA_
(1) Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package.
(2) DBV/DCK: The actual top-side marking has one additional character that designates the assembly/test site.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 2005, Texas Instruments Incorporated




etcTI

MAX4594 Datasheet Preview

MAX4594 Datasheet

SINGLE-CHANNEL SPST ANALOG SWITCH

No Preview Available !

MAX4594
SINGLEĆCHANNEL 10ĆW SPST ANALOG SWITCH
SLLS639 − JANUARY 2005
Pin Configurations
Available in Other Pin Configurations
www.ti.com
COM 1
NO 2
GND 3
5 V+
4 IN
MAX4594
COM 1
NC 2
GND 3
5 V+
4 IN
MAX4595
IN 1
COM 2
GND 3
5 V+
4 NO
IN 1
COM 2
GND 3
5 V+
4 NC
MAX4596
MAX4597
Absolute Minimum and Maximum Ratings(1)(2)
over operating free-air temperature range (unless otherwise noted)
V+
VNO
VCOM
IK
INO
ICOM
INO
ICOM
VI
IIK
I+
IGND
Supply voltage range(3)
Analog voltage range(3)(4)
Analog port diode current
On-state switch current
On-state switch current
(pulsed at 1 ms, 10% duty cycle)
Digital input voltage range(3)(4)
Digital input clamp current
Continuous current through V+
Continuous current through GND
θJA Package thermal impedance(5)
VNO, VCOM < 0
VNO, VCOM = 0 to V+
VNO, VCOM = 0 to V+
VI < 0
DBV package
DCK package
MIN
−0.3
MAX UNIT
6V
−0.3 V+ + 0.3
−50
V
mA
−20 20 mA
−40
−0.3
−50
−100
40 mA
6V
mA
100 mA
mA
206
°C/W
252
Tstg Storage temperature range
−65 150 °C
(1) Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade
device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified
is not implied.
(2) The algebraic convention, whereby the most negative value is a minimum and the most positive value is a maximum
(3) All voltages are with respect to ground, unless otherwise specified.
(4) The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
(5) The package thermal impedance is calculated in accordance with JESD 51-7.
2


Part Number MAX4594
Description SINGLE-CHANNEL SPST ANALOG SWITCH
Maker etcTI
PDF Download

MAX4594 Datasheet PDF






Similar Datasheet

1 MAX459 8x4 Video Crosspoint Switches
Maxim
2 MAX4590 CMOS Analog Switches
Maxim Integrated
3 MAX4591 SPST Analog Switches
Maxim
4 MAX4592 SPST Analog Switches
Maxim Integrated
5 MAX4593 SPST Analog Switches
Maxim Integrated
6 MAX4594 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches
Maxim
7 MAX4594 SINGLE-CHANNEL SPST ANALOG SWITCH
etcTI
8 MAX4595 Low-Voltage / Single-Supply / 10 SPST CMOS Analog Switches
Maxim
9 MAX4595 SINGLE-CHANNEL SPST ANALOG SWITCH
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy