900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

MSP430F2419 Datasheet Preview

MSP430F2419 Datasheet

Mixed-Signal Microcontroller

No Preview Available !

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
MSP430F2619, MSP430F2618, MSP430F2617, MSP430F2616
MSP430F2419, MSP430F2418, MSP430F2417, MSP430F2416
SLAS541L – JUNE 2007 – REVISED MAY 2020
MSP430F261x, MSP430F241x Mixed-Signal Microcontrollers
1 Device Overview
1.1 Features
1
• Low supply voltage range: 1.8 V to 3.6 V
• Ultra-low power consumption
– Active mode: 365 µA at 1 MHz, 2.2 V
– Standby mode (VLO): 0.5 µA
– Off mode (RAM retention): 0.1 µA
• Wake up from standby mode in less than 1 µs
• 16-bit RISC architecture, 62.5-ns instruction cycle
time
• Three-channel internal DMA (MSP430F261x only)
• 12-bit analog-to-digital converter (ADC) with
internal reference, sample-and-hold, and autoscan
feature
• Dual 12-bit digital-to-analog converters (DACs)
with synchronization (MSP430F261x only)
• 16-bit Timer_A with three capture/compare
registers
• 16-bit Timer_B with seven capture/compare
registers with shadow registers
• On-chip comparator
• Four universal serial communication interfaces
(USCIs)
– USCI_A0 and USCI_A1
– Enhanced UART supporting automatic baud-
rate detection
– IrDA encoder and decoder
– Synchronous SPI
– USCI_B0 and USCI_B1
– I2C
– Synchronous SPI
• Supply voltage supervisor and monitor with
programmable level detection
• Brownout detector
• Bootloader (BSL)
• Serial onboard programming, no external
programming voltage needed, programmable code
protection by security fuse
• Family members (also see Device Comparison)
– MSP430F2416
– 92KB + 256 bytes flash memory
– 4KB RAM
– MSP430F2417
– 92KB + 256 bytes flash memory
– 8KB RAM
– MSP430F2418
– 116KB + 256 bytes flash memory
– 8KB RAM
– MSP430F2419
– 120KB + 256 bytes flash memory
– 4KB RAM
– MSP430F2616
– 92KB + 256 bytes flash memory
– 4KB RAM
– MSP430F2617
– 92KB + 256 bytes flash memory
– 8KB RAM
– MSP430F2618
– 116KB + 256 bytes flash memory
– 8KB RAM
– MSP430F2619
– 120KB + 256 bytes flash memory
– 4KB RAM
• Available in 80-pin quad flat pack (LQFP), 64-pin
LQFP, and 113-pin ball grid array (nFBGA)
1.2 Applications
• Sensor systems
• Industrial control applications
• Hand-held meters
• Medical imaging applications
1.3 Description
The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consists of several devices
featuring different sets of peripherals targeted for various applications. The architecture, combined with
five low-power modes is optimized to achieve extended battery life in portable measurement applications.
The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute
to maximum code efficiency. The calibrated digitally controlled oscillator (DCO) allows wake-up from low-
power modes to active mode in less than 1 µs.
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.




etcTI

MSP430F2419 Datasheet Preview

MSP430F2419 Datasheet

Mixed-Signal Microcontroller

No Preview Available !

MSP430F2619, MSP430F2618, MSP430F2617, MSP430F2616
MSP430F2419, MSP430F2418, MSP430F2417, MSP430F2416
SLAS541L – JUNE 2007 – REVISED MAY 2020
www.ti.com
The MSP430F261x and MSP430F241x series are microcontroller configurations with two built-in 16-bit
timers, a fast 12-bit ADC, a comparator, two 12-bit DACs, four USCI modules, DMA, and up to 64 I/O
pins. The MSP430F241x devices are identical to the MSP430F261x devices, with the exception that the
DAC12 and the DMA modules are not implemented.
The LQFP-64 package is also available as a nonmagnetic package for medical imaging applications.
For complete module descriptions, see the MSP430F2xx, MSP430G2xx Family User's Guide.
PART NUMBER
Device Information(1)
PACKAGE
BODY SIZE(2)
MSP430F2619TPN
LQFP (80)
12 mm × 12 mm
MSP430F2619TPM
LQFP (64)
10 mm × 10 mm
MSP430F2619TZCA
MSP430F2619TZQW (3)
nFBGA (113)
MicroStar Junior™ BGA (113)
7 mm × 7 mm
7 mm × 7 mm
(1) For the most current part, package, and ordering information, see the Package Option Addendum in
Section 8, or see the TI website at www.ti.com.
(2) The sizes shown here are approximations. For the package dimensions with tolerances, see the
Mechanical Data in Section 8.
(3) All orderable part numbers in the ZQW (MicroStar Junior BGA) package have been changed to a
status of Last Time Buy. Visit the Product life cycle page for details on this status.
2 Device Overview
Copyright © 2007–2020, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Links: MSP430F2619 MSP430F2618 MSP430F2617 MSP430F2616 MSP430F2419 MSP430F2418
MSP430F2417 MSP430F2416


Part Number MSP430F2419
Description Mixed-Signal Microcontroller
Maker etcTI
PDF Download

MSP430F2419 Datasheet PDF






Similar Datasheet

1 MSP430F2410 MIXED SIGNAL MICROCONTROLLER
etcTI
2 MSP430F2416 Mixed-Signal Microcontroller
etcTI
3 MSP430F2417 Mixed-Signal Microcontroller
etcTI
4 MSP430F2418 Mixed-Signal Microcontroller
etcTI
5 MSP430F2419 Mixed-Signal Microcontroller
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy