900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

MSP430F5328-EP Datasheet Preview

MSP430F5328-EP Datasheet

Mixed-Signal Microcontrollers

No Preview Available !

MSP430F5328-EP
www.ti.com
MIXED SIGNAL MICROCONTROLLER
SLAS954 – DECEMBER 2013
FEATURES
1
2 Low Supply Voltage Range:
3.6 V Down to 1.8 V
• 16-Bit Timer TA0, Timer_A With Five
Capture/Compare Registers
• Ultralow Power Consumption
– Active Mode (AM):
All System Clocks Active
290 µA/MHz at 8 MHz, 3 V, Flash Program
Execution (Typical)
150 µA/MHz at 8 MHz, 3 V, RAM Program
Execution (Typical)
– Standby Mode (LPM3):
Real-Time Clock With Crystal , Watchdog,
and Supply Supervisor Operational, Full
RAM Retention, Fast Wake-Up:
1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General
Purpose Counter, Watchdog, and Supply
Supervisor Operational, Full RAM
Retention, Fast Wake-Up:
1.4 µA at 3 V (Typical)
– Off Mode (LPM4):
Full RAM Retention, Supply Supervisor
Operational, Fast Wake-Up:
1.1 µA at 3 V (Typical)
– Shutdown Mode (LPM4.5):
0.18 µA at 3 V (Typical)
• Wake-Up From Standby Mode in 3.5 µs
(Typical)
• 16-Bit RISC Architecture, Extended Memory,
Up to 25-MHz System Clock
• Flexible Power Management System
– Fully Integrated LDO With Programmable
Regulated Core Supply Voltage
• 16-Bit Timer TA1, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TA2, Timer_A With Three
Capture/Compare Registers
• 16-Bit Timer TB0, Timer_B With Seven
Capture/Compare Shadow Registers
• Two Universal Serial Communication
Interfaces
– USCI_A0 and USCI_A1 Each Support:
– Enhanced UART Supports Auto-
Baudrate Detection
– IrDA Encoder and Decoder
– Synchronous SPI
– USCI_B0 and USCI_B1 Each Support:
– I2CTM
– Synchronous SPI
• Integrated 3.3-V Power System
• 12-Bit Analog-to-Digital (A/D) Converter With
Internal Reference, Sample-and-Hold, and
Autoscan Feature
• Comparator
• Hardware Multiplier Supporting 32-Bit
Operations
• Serial Onboard Programming, No External
Programming Voltage Needed
• Three Channel Internal DMA
• Basic Timer With Real-Time Clock Feature
• Family Members are Summarized in
– Supply Voltage Supervision, Monitoring,
and Brownout
• Unified Clock System
– FLL Control Loop for Frequency
Stabilization
• For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User's
Guide (SLAU208)
• Controlled Baseline
• One Assembly and Test Site
– Low-Power Low-Frequency Internal Clock
Source (VLO)
– Low-Frequency Trimmed Internal Reference
Source (REFO)
• One Fabrication Site
• Wide operational temperature range of –40°C
to +105°C (some noted parameters specified
for –40°C to +85°C only)
– 32-kHz Watch Crystals (XT1)
• Extended Product Life Cycle
– High-Frequency Crystals Up to 32 MHz
• Extended Product-Change Notification
(XT2)
1
• Product Traceability
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2013, Texas Instruments Incorporated




etcTI

MSP430F5328-EP Datasheet Preview

MSP430F5328-EP Datasheet

Mixed-Signal Microcontrollers

No Preview Available !

MSP430F5328-EP
SLAS954 – DECEMBER 2013
www.ti.com
DESCRIPTION
The MSP430F5328's architecture, combined with extensive low-power modes is optimized to achieve extended
battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit
registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator
(DCO) allows wake-up from low-power modes to active mode in 3.5 µs (typical).
The MSP430F5328 is a microcontroller configuration with an integrated 3.3-V LDO, four 16-bit timers, a high-
performance 12-bit analog-to-digital converter (ADC), two universal serial communication interfaces (USCI),
hardware multiplier, DMA, real-time clock module with alarm capabilities, and 47 I/O pins.
Typical applications include analog and digital sensor systems, data loggers, and various general-purpose
applications.
TJ
–40°C to 105°C
PACKAGE
VQFN - RGC
ORDERING INFORMATION(1)
ORDERABLE PART NUMBER
TOP-SIDE MARKING
MSP430F5328TRGCTEP
M4F5328T
VID NUMBER
V62/13628-01XE
(1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
2 Submit Documentation Feedback
Copyright © 2013, Texas Instruments Incorporated


Part Number MSP430F5328-EP
Description Mixed-Signal Microcontrollers
Maker etcTI
Total Page 30 Pages
PDF Download

MSP430F5328-EP Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 MSP430F5328-EP Mixed-Signal Microcontrollers
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy