MSP430F6723
Overview
- Low Supply Voltage Range: 3.6 V Down to 1.8 V
- Ultra-Low Power Consumption - Active Mode (AM): All System Clocks Active 265 µA/MHz at 8 MHz, 3.0 V, Flash Program Execution (Typical) 140 µA/MHz at 8 MHz, 3.0 V, RAM Program Execution (Typical) - Standby Mode (LPM3): Real-Time Clock (RTC) With Crystal, Watchdog, and Supply Supervisor Operational, Full RAM Retention, Fast Wakeup: 1.7 µA at 2.2 V, 2.5 µA at 3.0 V (Typical) - Off Mode (LPM4): Full RAM Retention, Supply Supervisor Operational, Fast Wakeup: 1.6 µA at 3.0 V (Typical) - Shutdown RTC Mode (LPM3.5): Shutdown Mode, Active Real-Time Clock (RTC) With Crystal: 1.24 µA at 3.0 V (Typical) - Shutdown Mode (LPM4.5): 0.78 µA at 3.0 V (Typical)
- Wake up From Standby Mode in 3 µs (Typical)
- 16-Bit RISC Architecture, Extended Memory, up to 25-MHz System Clock
- Flexible Power Management System - Fully Integrated LDO With Programmable Regulated Core Supply Voltage - Supply Voltage Supervision, Monitoring, and Brownout - System Operation From up to Two Auxiliary Power Supplies
- Unified Clock System - FLL Control Loop for Frequency Stabilization - Low-Power Low-Frequency Internal Clock Source (VLO) - Low-Frequency Trimmed Internal Reference Source (REFO) - 32-kHz Crystals (XT1)
- One 16-Bit Timer With Three Capture/Compare Registers
- Three 16-Bit Timers With Two Capture/Compare Registers Each
- Enhanced Universal Serial Communication Interfaces - eUSCI_A0, eUSCI_A1, and eUSCI_A2 - Enhanced UART Supports Automatic BaudRate Detection - IrDA Encoder and Decoder - Synchronous SPI - eUS
