MSP430FR5727 Datasheet | Texas Instruments

Overview 1.1 Features - Embedded Microcontroller - 16-Bit RISC Architecture up to 8-MHz Clock - Wide Supply Voltage Range (2 V to 3.6 V) - - 40°C to 85°C Operation - Optimized Ultra-Low-Power Modes - Active Mode: 81.4 µA/MHz (Typical) - Standby (LPM3 With VLO): 6.3 µA (Typical) - Real-Time Clock (RTC) (LPM3.5 With Crystal): 1.5 µA (Typical) - Shutdown (LPM4.5): 0.32 µA (Typical) - Ultra-Low-Power Ferroelectric RAM (FRAM) - Up to 16KB of Nonvolatile Memory - Ultra-Low-Power Writes - Fast Write at 125 ns per Word (16KB in 1 ms) - Built-In Error Correction Coding (ECC) and Memory Protection Unit (MPU) - Universal Memory = Program + Data + Storage - 1015 Write Cycle Endurance - Radiation Resistant and Nonmagnetic - Intelligent Digital Peripherals - 32-Bit Hardware Multiplier (MPY) - Three-Channel Internal DMA - Real-Time Clock (RTC) With Calendar and Alarm Functions - Five 16-Bit Timers With up to Three Capture/pare Registers - 16-Bit Cyclic Redundancy Checker (CRC) - High-Performance Analog - 16-Channel Analog parator With Voltage Reference and Programmable Hysteresis - 12-Channel 10-Bit Analog-to-Digital Converter (ADC) With Internal Reference and Sample-and Hold - 200 ksps at 100-µA Consumption - Enhanced Serial munication - e USCI_A0 and e USCI_A1 Support: - UART With Automatic Baud-Rate Detection - Ir DA Encode and Decode - SPI - e USCI_B0 Supports: - I2C With Multiple-Slave Addressing - SPI - Hardware UART Bootloader (BSL) - Power Management...