Datasheet4U Logo Datasheet4U.com

PTH05060W - 5-V Input Non-Isolated Wide-Output Adjust Power Module

General Description

The PTH05060W non-isolated power module is small in size but big on performance and flexibility.

Key Features

  • Up to 10-A Output Current.
  • 5-V Input Voltage.
  • Wide-Output Voltage Adjust (0.8 V to 3.6 V).
  • Efficiencies up to 96 %.
  • 150 W/in³ Power Density.
  • On/Off Inhibit.
  • Output Voltage Sense.
  • Pre-Bias Startup.
  • Margin Up/Down Controls.
  • Under-Voltage Lockout.
  • Auto-Track™ Sequencing.
  • Output Over-Current Protection (Non-Latching, Auto-Reset).
  • Operating Temp:.
  • 40 to +85 °C.
  • DSP C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PTH05060W DC-DC / Non-Isolated POLA Emerson
PTH05060Y DC-DC / Non-Isolated POLA memory Emerson
PTH05010W DC-DC / Non-Isolated POLA Emerson
PTH05010Y DC-DC / Non-Isolated POLA memory Emerson
PTH05020W DC-DC / Non-Isolated POLA Emerson

Other Datasheets by Texas Instruments

Part Number Description
PTH05060Y 10-A NON-ISOLATED DDR/QDR MEMORY BUS TERMINATION MODULES
PTH05000W 5-V Input Non-Isolated Wide-Output Adjust Power Module
PTH05010W 5-V Input Non-Isolated Wide-Output Adjust Power Module
PTH05010Y 15-A NON-ISOLATED DDR/QDR MEMORY BUS TERMINATION MODULES
PTH05020W 5-V Input Non-Isolated Wide-Output Adjust Power Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
PTH05060W —5-V Input 10-A, 5-V Input Non-Isolated Wide-Output Adjust Power Module SLTS216B – MAY 2003 – REVISED DECEMBER 2003 NOMINAL SIZE = 1 in x 0.62 in (25,4 mm x 15,75 mm) Features • Up to 10-A Output Current • 5-V Input Voltage • Wide-Output Voltage Adjust (0.8 V to 3.6 V) • Efficiencies up to 96 % • 150 W/in³ Power Density • On/Off Inhibit • Output Voltage Sense • Pre-Bias Startup • Margin Up/Down Controls • Under-Voltage Lockout • Auto-Track™ Sequencing • Output Over-Current Protection (Non-Latching, Auto-Reset) • Operating Temp: –40 to +85 °C • DSP Compatible Output Voltages • Safety Agency Approvals: UL 1950, CSA 22.