RC4558P Datasheet | Texas Instruments

Features - Wide mon-mode and differential voltage ranges - No frequency pensation required - Low power consumption - No latch-up - Gain bandwidth product: 4MHz typical - Gain and phase match between amplifiers - Low noise: 6.5n V/√Hz typical at 10k Hz - Low distortion and noise: 0.0001% at 1k Hz 2 Applications - AV receivers - Professional audio mixers - Soundbars - Wireless speakers RIN VIN 3 Description The RC4558 device is a dual general-purpose operational amplifier. The bination of the wide supply voltage range (10V to 30V), low noise (6.5n V/ √Hz), and distortion performance (0.0001% THD+N) of the device allow the RC4558 to be used in various audio applications. The high mon-mode input voltage range and the absence of latch-up of the device are designed for voltage-follower applications. The internal frequency pensation of the device allows for stability without external ponents. Package Information (1) PART NUMBER PACKAGE PACKAGE SIZE(2) D (SOIC, 8) 4.9mm × 6mm DGK (VSSOP, 8) 3mm × 4.9mm RC4558 P (PDIP, 8) 9.81mm × 9.43mm PW (TSSOP, 8) 3mm × 6.4mm PS (SOP, 8) 6.2mm × 7.8mm (1) For all available packages, see Section 10. (2) The package size (length × width) is a nominal value and includes pins, where applicable. + VOUT Noninverting Amplifier Schematic An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION...