900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

SM73302 Datasheet Preview

SM73302 Datasheet

Decompensated Operational Amplifier

No Preview Available !

SM73302
www.ti.com
SNOSB93A – AUGUST 2011 – REVISED APRIL 2013
SM73302 88 MHz, Precision, Low Noise, 1.8V CMOS Input, Decompensated Operational
Amplifier
Check for Samples: SM73302
FEATURES
1
2 (Typical 5V Supply, Unless Otherwise Noted)
• Renewable Energy Grade
• Input Offset Voltage ±150 µV (max)
• Input Referred Voltage Noise 5.8 nV/Hz
• Input Bias Current 100 fA
• Gain Bandwidth Product 88 MHz
• Supply Voltage Range 1.8V to 5.5V
• Supply Current 1.15mA
• Rail-to-Rail Output Swing
– @ 10 kLoad 25 mV from Rail
– @ 2 kLoad 45 mV from Rail
• 2.5V and 5.0V Performance
• Total Harmonic Distortion 0.04% @1 kHz, 600
• Temperature Range 40°C to 125°C
APPLICATIONS
• ADC Interface
• Photodiode Amplifiers
• Active Filters and Buffers
• Low Noise Signal Processing
• Medical Instrumentation
• Sensor Interface Applications
DESCRIPTION
The SM73302 low noise, CMOS input operational
amplifier offers a low input voltage noise density of
5.8 nV/Hz while consuming only 1.15 mA of
quiescent current. The SM73302 is stable at a gain of
10 and has a gain bandwidth (GBW) product of 88
MHz. The SM73302 has a supply voltage range of
1.8V to 5.5V and can operate from a single supply.
The SM73302 features a rail-to-rail output stage, and
is part of the precision amplifier family and is ideal for
a variety of instrumentation applications.
The SM73302 provides optimal performance in low
voltage and low noise systems. A CMOS input stage,
with typical input bias currents in the range of a few
femtoamperes, and an input common mode voltage
range, which includes ground, makes the SM73302
ideal for low power sensor applications where high
speeds are needed.
The SM73302 is manufactured using an advanced
VIP50 process. The SM73302 is offered in a 5-Pin
SOT-23 package.
Typical Application
IIN
CCM
CD
CF
RF
-
+
+
VOUT
-
VB
CIN = CD + CCM
VOUT
IIN
=
-
RF
Figure 1. Photodiode Transimpedance Amplifier
1000
5V
100
2.5V
10
1
0.1
1
10 100 1k 10k
FREQUENCY (Hz)
Figure 2. Input Referred Voltage Noise vs.
Frequency
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
2
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2013, Texas Instruments Incorporated




etcTI

SM73302 Datasheet Preview

SM73302 Datasheet

Decompensated Operational Amplifier

No Preview Available !

SM73302
SNOSB93A – AUGUST 2011 – REVISED APRIL 2013
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)(2)
ESD Tolerance(3)
Human Body Model
Machine Model
Charge-Device Model
VIN Differential
Supply Voltage (V+ – V)
Input/Output Pin Voltage
Storage Temperature Range
Junction Temperature(4)
For soldering specifications: see http://www.ti.com/lit/SNOA549
2000V
200V
1000V
±0.3V
6.0V
V+ +0.3V, V0.3V
65°C to 150°C
+150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional. For specifications and the test conditions, see the Electrical Characteristics Tables.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of
JEDEC)Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).
(4) The maximum power dissipation is a function of TJ(MAX), θJA. The maximum allowable power dissipation at any ambient temperature is
PD = (TJ(MAX) - TA)/θJA. All numbers apply for packages soldered directly onto a PC Board.
Operating Ratings(1)
Temperature Range(2)
Supply Voltage (V+ – V)
Package Thermal Resistance (θJA(2))
40°C TA 125°C
0°C TA 125°C
5-Pin SOT-23
40°C to 125°C
2.0V to 5.5V
1.8V to 5.5V
180°C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional. For specifications and the test conditions, see the Electrical Characteristics Tables.
(2) The maximum power dissipation is a function of TJ(MAX), θJA. The maximum allowable power dissipation at any ambient temperature is
PD = (TJ(MAX) - TA)/θJA. All numbers apply for packages soldered directly onto a PC Board.
2
Submit Documentation Feedback
Product Folder Links: SM73302
Copyright © 2011–2013, Texas Instruments Incorporated



Part Number SM73302
Description Decompensated Operational Amplifier
Maker etcTI
Total Page 3 Pages
PDF Download

SM73302 Datasheet PDF





Similar Datasheet

1 SM73302 Decompensated Operational Amplifier
etcTI
2 SM73302 Decompensated Operational Amplifier
National Semiconductor
3 SM73306 CMOS Rail-to-Rail Input and Output Operational Amplifier
National Semiconductor
4 SM73307 CMOS Input Amplifier
etcTI
5 SM73307 CMOS Input Amplifier
National Semiconductor
6 SM73308 RRO Operational Amplifier
etcTI
7 SM73308 RRO Operational Amplifier
National Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy