900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

SM73308 Datasheet Preview

SM73308 Datasheet

RRO Operational Amplifier

No Preview Available !

SM73308
www.ti.com
SNOSB90B – JUNE 2011 – REVISED APRIL 2013
Low Offset, Low Noise, RRO Operational Amplifier
Check for Samples: SM73308
FEATURES
1
23(Unless Otherwise Noted, Typical Values at VS
= 2.7V)
• Renewable Energy Grade
• Ensured 2.7V and 5V Specifications
• Maximum VOS 850μV (Limit)
• Voltage noiseN
– f = 100 Hz 12.5nV/Hz
– f = 10 kHz 7.5nV/Hz
• Rail-to-Rail Output Swing
– RL = 600100mV From Rail
– RL = 2k50mV From Rail
• Open Loop Gain With RL = 2k100dB
• VCM 0 to V+ 0.9V
• Supply Current 550µA
• Gain Bandwidth Product 3.5MHz
• Temperature Range 40°C to 125°C
APPLICATIONS
• Transducer Amplifier
• Instrumentation Amplifier
• Precision Current Sensing
• Data Acquisition Systems
• Active Filters and Buffers
• Sample and Hold
• Portable/battery Powered Electronics
• Automotive
DESCRIPTION
The SM73308 is a single low noise precision
operational amplifier intended for use in a wide range
of applications. Other important characteristics
include: an extended operating temperature range of
40°C to 125°C, the tiny SC70-5 package, and low
input bias current.
The extended temperature range of 40°C to 125°C
allows the SM73308 to accommodate a broad range
of applications. The SM73308 expands TI’s Silicon
Dust™ amplifier portfolio offering enhancements in
size, speed, and power savings. The SM73308 is
ensured to operate over the voltage range of 2.7V to
5.0V and has rail-to-rail output.
The SM73308 is designed for precision, low noise,
low voltage, and miniature systems. This amplifier
provides rail-to-rail output swing into heavy loads.
The maximum input offset is 850 μV at room
temperature and the input common mode voltage
range includes ground.
The SM73308 is offered in the tiny SC70-5 package.
Connection Diagram
1
+IN
2
+
GND
-
3
-IN
5 V+
4 VOUT
Figure 1. SC70-5 – Top View
See Package Number DCK
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Silicon Dust is a trademark of Texas Instruments.
2
All other trademarks are the property of their respective owners.
3
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2011–2013, Texas Instruments Incorporated




etcTI

SM73308 Datasheet Preview

SM73308 Datasheet

RRO Operational Amplifier

No Preview Available !

SM73308
SNOSB90B – JUNE 2011 – REVISED APRIL 2013
Instrumentation Amplifier
V1
+
-
V01
R2
R1
R1
R11 = a
-
V2
+
R1
V02
R2
KR2
-
+
VOUT
KR2
www.ti.com
VO = -K (2a + 1) (V1 - V2)
(1)
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings(1)(2)
ESD Tolerance(3)
Differential Input Voltage
Voltage at Input Pins
Current at Input Pins
Supply Voltage (V+–V )
Output Short Circuit to V+
Output Short Circuit to V
Mounting Temperture
Storage Temperature Range
Junction Temperature(6)
Machine Model
Human Body Model
Infrared or Convection (20 sec)
Wave Soldering Lead Temp (10 sec)
200V
2000V
± Supply Voltage
(V+) + 0.3V, (V) – 0.3V
±10 mA
5.75V
See (4)
See (5)
235°C
260°C
65°C to 150°C
150°C
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
(2) If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
(3) Human Body Model is 1.5 kin series with 100 pF. Machine Model is 0in series with 20 pF.
(4) Shorting output to V+ will adversely affect reliability.
(5) Shorting output to Vwill adversely affect reliability.
(6) The maximum power dissipation is a function of TJ(MAX) , θJA, and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(MAX)–T A) / θJA. All numbers apply for packages soldered directly into a PC board.
Operating Ratings(1)
Supply Voltage
Temperature Range
Thermal Resistance (θJA)
2.7V to 5.5V
40°C to 125°C
440 °C/W
(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for
which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test
conditions, see the Electrical Characteristics.
2
Submit Documentation Feedback
Product Folder Links: SM73308
Copyright © 2011–2013, Texas Instruments Incorporated



Part Number SM73308
Description RRO Operational Amplifier
Maker etcTI
Total Page 3 Pages
PDF Download

SM73308 Datasheet PDF





Similar Datasheet

1 SM73302 Decompensated Operational Amplifier
etcTI
2 SM73302 Decompensated Operational Amplifier
National Semiconductor
3 SM73306 CMOS Rail-to-Rail Input and Output Operational Amplifier
National Semiconductor
4 SM73307 CMOS Input Amplifier
etcTI
5 SM73307 CMOS Input Amplifier
National Semiconductor
6 SM73308 RRO Operational Amplifier
etcTI
7 SM73308 RRO Operational Amplifier
National Semiconductor





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy