SN54F373J Datasheet | Texas Instruments

description These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. SN54F373 . . . J PACKAGE SN74F373 . . . DB, DW, OR N PACKAGE (TOP VIEW) OE 1 1Q 2 1D 3 2D 4 2Q 5 3Q 6 3D 7 4D 8 4Q 9 GND 10 20 VCC 19 8Q 18 8D 17 7D 16 7Q 15 6Q 14 6D 13 5D 12 5Q 11 LE SN54F373 . . . FK PACKAGE (TOP VIEW) 8Q 1Q 1D The eight latches of the ′F373 are transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs will follow the data (D) inputs. When the latch enable is taken low, the Q outputs are latched at the logic levels set up at the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup ponents. 4Q 3 2 1 20 19 2D 4 18 8D 2Q 5 17 7D 3Q 6 16 7Q 3D 7 15 6Q 4D 8 14 6D 9 10 11 12 13 5Q 5D The output-enable (OE) input does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state. The SN74F373 is available in TI’s shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in less than half the printed-circuit-board area. The SN54F373 is characterized for operation over the full military temperature range of - 55°C to 125°C. The SN74F373 is characterized for operation from 0°C to 70°C. FUNCTION TABLE (each latch) INPUTS OE...