SN54HC151 Datasheet | Texas Instruments

Features - Wide operating voltage range of 2 V to 6 V - Outputs can drive up to 10 LSTTL loads - Low power consumption, 80-μA max ICC - Typical tpd = 13 ns - ±6-m A Output drive at 5 V - Low input current of 1 μA max - 8-Line to 1-line multiplexers can perform as: - Boolean-function generators - Parallel-to-serial converters - Data source selectors 2 Description This data selector/multiplexer provides full binary decoding to select one of eight data sources. The strobe (G) input must be at a low logic level to enable the inputs. A high level at the strobe terminal forces the standard output (Y) low and the inverted output (W) high. PART NUMBER SN54HC151J SN74HC151D SN74HC151N SN74HC151NS SN74HC151PW SNJ54HC151FK Device Information PACKAGE(1) BODY SIZE (NOM) CDIP (16) 24.38 mm × 6.92 mm SOIC (16) 9.90 mm × 3.90 mm PDIP (16) 19.31 mm × 6.35 mm SO (16) 6.20 mm × 5.30 mm TSSOP (16) 5.00 mm × 4.40 mm LCCC (20) 8.89 mm × 8.45 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. Pin numbers shown are for the D, J, N, NS, PW, and W packages. Functional Block Diagram An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA. SN54HC151, SN74HC151 SCLS110F - DECEMBER 1982 - REVISED FEBRUARY 2022 .ti. Table of Contents 1 Features 1 2 Description 1 3 Revision History 2 4 Pin Configuration and Functions 3 5 Specifications 4 5.1 Absolute Maximum Ratings 4 5.2 Remended Operating Conditions(1) 4 5.3 Thermal...