Datasheet4U Logo Datasheet4U.com

SN54HC273W Datasheet Octal D-Type Flip-Flops

Manufacturer: Texas Instruments

Download the SN54HC273W datasheet PDF. This datasheet also includes the SN54HC273 variant, as both parts are published together in a single manufacturer document.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SN54HC273-etcTI.pdf) that lists specifications for multiple related part numbers.

General Description

The SNx4HC273 devices are positive-edge-triggered D-type flip-flops with a direct active low clear ( CLR) input.

Information at the data (D) inputs meeting the setup time requirements is transferred to the Q outputs on the positive-going edge of the clock (CLK) pulse.

Clock triggering occurs at a particular voltage level and is not related directly to the transition time of the positive-going pulse.

Overview

SN54HC273, SN74HC273 SCLS136F – DECEMBER 1982 – REVISED APRIL 2022 SNx4HC273 Octal D-Type Flip-Flops With Clear.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • Outputs can drive up to 10 LSTTL loads.
  • Low power consumption, 80-µA maximum ICC.
  • Typical tpd = 12 ns.
  • ±4-mA output drive at 5 V.
  • Low input current of 1-µA maximum.
  • Contain eight flip-flops with single-rail outputs.
  • Direct clear input.
  • Individual data input to each flip-flop.
  • On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted.

More Datasheets from Texas Instruments

Part Number Description
SN54HC273 Octal D-Type Flip-Flops
SN54HC27 Triple 3-Input NOR Gates
SN54HC20 Dual 4-Input NAND Gates
SN54HC20J Dual 4-Input NAND Gates
SN54HC20W Dual 4-Input NAND Gates
SN54HC21 DUAL 4-INPUT POSITIVE-AND GATES
SN54HC240 OCTAL BUFFERS AND LINE DRIVERS
SN54HC241 OCTAL BUFFERS AND LINE DRIVERS
SN54HC244 Octal Buffers and Line Drivers
SN54HC245 Octal Bus Transceivers