Datasheet4U Logo Datasheet4U.com

SN54HC365 Datasheet Hex Buffers And Line Drivers

Manufacturer: Texas Instruments

Overview: SN54HC365, SN74HC365 SCLS308E – JANUARY 1996 – REVISED MARCH 2022 SNx4HC365 Hex Buffers and Line Drivers With 3-State Outputs.

General Description

The SNx4HC365 contains six independent buffers with 3-state outputs.

All channels are placed into the high-impedance mode when either of the output enable (OE) pins are set to the high state.

PART NUMBER SN54HC365J SN74HC365D SN74HC365N SN74HC365NS SN74HC365PW Device Information PACKAGE(1) BODY SIZE (NOM) CDIP (16) 24.38 mm × 6.92 mm SOIC (16) 9.90 mm × 3.90 mm PDIP (16) 19.31 mm × 6.35 mm SO (16) 6.20 mm × 5.30 mm TSSOP (16) 5.00 mm × 4.40 mm (1) For all available packages, see the orderable addendum at the end of the data sheet.

Key Features

  • Wide operating voltage range of 2 V to 6 V.
  • High-current 3-state outputs drive bus lines, buffer- memory address registers, or drive up to 15 LSTTL loads.
  • True outputs.
  • Low power consumption, 80-µA max ICC.
  • Typical tpd = 10 ns.
  • ±6-mA output drive at 5V.
  • Low input current of 1µA max OE1 OE2 A1 2.

SN54HC365 Distributor & Price

Compare SN54HC365 distributor prices and check real-time stock availability from major suppliers. Prices and inventory may vary by region and order quantity.

More Datasheets from Texas Instruments

Part Number Description
SN54HC367 HEX BUFFERS AND LINE DRIVERS
SN54HC32 Quadruple 2-Input Positive-OR Gates
SN54HC32J Quadruple 2-Input Positive-OR Gates
SN54HC32W Quadruple 2-Input Positive-OR Gates
SN54HC373 OCTAL TRANSPARENT D-TYPE LATCHES
SN54HC374 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN54HC377 OCTAL D-TYPE FLIP-FLOPS
SN54HC377J OCTAL D-TYPE FLIP-FLOPS
SN54HC393 DUAL 4-BIT BINARY COUNTERS
SN54HC00 Quadruple 2-Input Positive-NAND Gates