SN54HC574 - OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP

Texas Instruments

Datasheet Details

Part number	SN54HC574
Manufacturer	Texas Instruments ↗
File Size	1.98 MB
Description	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP
Datasheet	SN54HC574-etcTI.pdf

These octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving.

Wide Operating Voltage Range of 2 V to 6 V.
High-Current 3-State Noninverting Outputs Drive Bus Lines Directly or Up to 15 LSTTL Loads.
Low Power Consumption, 80-µA Max ICC.
Typical tpd = 22 ns.
±6-mA Output Drive at 5 V.
Low Input Current of 1-µA Max.
Bus-Structured Pinout.
On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessa.

📁 SN54HC574 Similar Datasheet

SN54HC595J - 16-bit bus transceiver and transparant D-type latch (nexperia)
SN54GTL16612 - 18-Bit LVTTL-to-GTL/GTL+ Universal Bus Transceivers (Rev. K) (ETCTI)
SN54LS00 - QUAD 2-INPUT NAND GATE (Motorola Inc)
SN54LS01 - QUAD 2-INPUT NAND GATE (Motorola Inc)
SN54LS02 - QUAD 2-INPUT NOR GATE (Motorola Inc)
SN54LS03 - QUAD 2-INPUT NAND GATE (Motorola Inc)
SN54LS04 - HEX INVERTER (Motorola Inc)
SN54LS05 - HEX INVERTER (Motorola Inc)

Other Datasheets by Texas Instruments

Published: Aug 25, 2020 |