Datasheet4U Logo Datasheet4U.com

SN54HCT240 - OCTAL BUFFERS AND LINE DRIVER

General Description

These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

Key Features

  • Operating voltage range of 4.5 V to 5.5 V.
  • High-current outputs drive up to 15 LSTTL loads.
  • Low power consumption, 80-μA max ICC.
  • Typical tpd = 12 ns.
  • ±6-mA output drive at 5 V.
  • Low input current of 1 μA max.
  • Inputs are TTL-voltage compatible.
  • 3-state outputs drive bus lines or buffer memory address registers 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN54HC595J 16-bit bus transceiver and transparant D-type latch nexperia
SN54LS00 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS01 QUAD 2-INPUT NAND GATE Motorola Inc
SN54LS02 QUAD 2-INPUT NOR GATE Motorola Inc
SN54LS03 QUAD 2-INPUT NAND GATE Motorola Inc

Other Datasheets by Texas Instruments

Part Number Description
SN54HCT244 Octal Buffers and Line Driver
SN54HCT245 Octal Bus Transceiver
SN54HCT257 QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXER
SN54HCT273 OCTAL D-TYPE FLIP-FLOPS
SN54HCT00 QUADRUPLE 2-INPUT POSITIVE-NAND GATE

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN54HCT240, SN74HCT240 SCLS174G – MARCH 1984 – REVISED MAY 2022 SNx4HCT240 Octal Buffers and Line Drivers With 3-State Outputs 1 Features • Operating voltage range of 4.5 V to 5.5 V • High-current outputs drive up to 15 LSTTL loads • Low power consumption, 80-μA max ICC • Typical tpd = 12 ns • ±6-mA output drive at 5 V • Low input current of 1 μA max • Inputs are TTL-voltage compatible • 3-state outputs drive bus lines or buffer memory address registers 2 Description These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The ’HCT240 devices are organized as two 4-bit buffers/drivers with separate output-enable (OE) inputs.