QUADRUPLE DIFFERENTIAL LINE RECEIVERS
D Meet or Exceed the Requirements of ANSI
Standard EIA/TIA-422-B, RS-423-B, and
D Meet ITU Recommendations V.10, V.11,
X.26, and X.27
D Designed for Multipoint Bus Transmission
on Long Bus Lines in Noisy Environments
D 3-State Outputs
D Common-Mode Input Voltage Range
−12 V to 12 V
D Input Sensitivity . . . ± 200 mV
D Input Hysteresis . . . 50 mV Typ
D High Input Impedance . . . 12 kΩ Min
D Operate From Single 5-V Supply
D Low-Power Requirements
D Plug-In Replacement for MC3486
SLLS145C − OCTOBER 1990 − REVISED NOVEMBER 2006
D OR N PACKAGE
1, 2EN 4
12 3, 4EN
The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are
designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU
recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits
per second. Each of the two pairs of receivers has a common active-high enable.
The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity
of ± 200 mV over a common-mode input voltage range of ± 12 V. The SN65175 and SN75175 are designed for
optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.
The SN65175 is characterized for operation from −40°C to 85°C. The SN75175 is characterized for operation
from 0°C to 70°C.
VID ≥ 0.2 V
−0.2 V < VID < 0.2 V
VID ≤ − 0.2 V
H = high level, L = low level, ? = indeterminate,
X = irrelevant, Z = high impedance (off)
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
• POST OFFICE BOX 655303 DALLAS, TEXAS 75265
Copyright 2006, Texas Instruments Incorporated