SN65C1154N Datasheet | Texas Instruments

description /ordering information SLLS151D - DECEMBER 1988 - REVISED APRIL 2003 SN65C1154 . . . N PACKAGE SN75C1154 . . . DW, N, OR NS PACKAGE (TOP VIEW) VDD 1 1RA 2 1DY 3 2RA 4 2DY 5 3RA 6 3DY 7 4RA 8 4DY 9 VSS 10 20 VCC 19 1RY 18 1DA 17 2RY 16 2DA 15 3RY 14 3DA 13 4RY 12 4DA 11 GND The SN65C1164 and SN75C1154 are low-power Bi MOS devices containing four independent drivers and receivers that are used to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). These devices are designed to conform to TIA/EIA-232-F. The drivers and receivers of the SN65C1154 and SN75C1154 are similar to those of the SN75C188 quadruple driver and SN75C189A quadruple receiver, respectively. The drivers have a controlled output slew rate that is limited to a maximum of 30 V/µs and the receivers have filters that reject input noise pulses of shorter than 1 µs. Both these features eliminate the need for external ponents. The SN65C1154 and SN75C1154 have been designed using low-power techniques in a Bi MOS technology. In most applications, the receivers contained in these devices interface to single inputs of peripheral devices such as ACEs, UARTs, or microprocessors. By using sampling, such peripheral devices usually are insensitive to the transition times of the input signals. If this is not the case, or for other uses, it is remended that the SN65C1154 and SN75C1154 receiver outputs be buffered by single Schmitt input gates or single gates of the HCMOS, ALS, or 74F logic families. ORDERING INFORMATION PACKAGE† ORDERABLE PART NUMBER TOP-SIDE MARKING - 40°C to 85°C PDIP (N) Tube of 20 PDIP (N) Tube of 20 SN75C1154N SN75C1154N 0°C to 70°C SOIC (DW) Tube of 25 Reel of 2500 SN75C1154DW SN75C1154DWR SN75C1154 SOP (NS) Reel of 2000 SN75C1154NSR SN75C1154 † Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at .ti./sc/package. Please be aware that an...